Replacement of cisco 7911

[protocol_1984]

Hi,

Cisco 7911 model is no more available in the market. Can anyone suggest an equivalent IP phone availablle in the market which works with CUCM 6.1 and above?

Thanks & Regards,

[ronpatel]

Hi

As per Cisco EOX link the 6921 phones whould be good for you. But minimum CUCm version required is 7.1.2

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/end_of_life_notice_c51-683624.html

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

[protocol_1984]

Hi,

Right now we have CUCM 6.1 ver and planning to upgrade to ver 9.0 in 6 months of time from now. We need to procure the ip phones to serve the users for next 6 months to work with 6.1 and later move on to the new ver. What is the best option?

Thanks & Regards,

[ronpatel]

Hi

Closest which I could find is 7931 which is supported in CUCM 6.X also.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps7062/product_data_sheet0900aecd80534259.html

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

[protocol_1984]

Hi,

Thanks Ronak. 7931G can work with 6.0 and later version and is the closest match to 7911...

Thanks & Regards,

[Venkitesh H Iyer]

Hello Raffiudeen,

Kindly find the attached pdf that has the Compatible System Information for CUCM 6.1 - Cisco Unified Communications Compatibility Tool

Hope this helps.

Thanks & Regards,

Venkitesh

[protocol_1984]

Hi,

Thanks Venkitesh. The doc is really useful to find the right end node for our current version of CUCM...

Thanks & Regards,