Hi guys,I would like to upgrade 3x ASR1004 Routers from IOS XE Software, Version 03.10.04.S - Extended Support Release and IOS XE Software, Version 03.10.02.S - Extended Support Release to IOS XE Release Denali-16.3.7 or Release Everest-16.6.5 in or...
Hi guys,I am trying to use, since 1 week ago, the Cisco Configuration Professional but once this is installed it doesn´t startup when i click on the icon.I have tryed with the 2.6 and the 2.8 versions, and none of them have worked.I am aware of the J...
Hi Guys!I am still working on the design of my big project and always that you think that every thing is solve, appears a details.So, here is a new situation unsolved.We need to deploy a fiber links to some buildings that will have access switches co...
Hello Guys! I am working on a new LAN design for aun airport. IT has 3 buildings that will be connected with Optic Fiber Using 10gbps transceivers.In One of The buildings will be The core, distribution and The access lawyer, also Data Center and Inte...
Hello! Does any body know if The SPF+ SPF-10g-sr Works on The X2 defaults ports on The WS-C4900m base unit, Using The OneX Converter Module?Or, This transceiver just can be deploy on The half cards, Using The WS-x4904-10g or The WS-x4908-10g with T...
Hi and thanks for your response.
If it's so, Can You tell me what the guide is trying to say at the tables:
- "Supported and Unsupported Cisco ASR 1000 Series Hardware": It shows the ASR1000-ESP10 within the Unsupported Column.
- "Supported Line Ca...
Hi, I was tryong to change my GPL To Latin America but It doesn't even appear un the drop down under CCW-R "Quick-lInks/Profile&Preferences/Preferecnes/General". I attached the evidence, please help me figuring out what is the issue with my CCO: djac...
Yes Sr. this is the zip file i am using.I have installed the CCP in a winXP 32bits and it work fine. But in my laptop it doesn´t work yet.Also i tried today with the JRE 1.6.0_31 and nothing the same message.BTW, when i try to run the CCP, for first ...
I f you have the 3560 Ip Base image, i recommend to Implement EIGRP. For the core implement a full EIGRP As and for each building EIGRP Stub network. For load balance, it is necessary to know wich switch and its way of connection are you using in the...
Hello, marwashawi.What i mean is as we know Cisco recomend to use a separate Core, Distribution and Access Switches to Data Center from the Switches of my campus network and Internet Edge. In some cases they recomend implement a collapsed Core and us...
