About martap

martap · 07-06-2021

Hi All, We're looking to replace the M1 cards that we have in our N7K's with F3 cards.We have 2 sites, 2 chassis' per site (otv multihome), and a dedicated OTV VDC in each chassis that only holds the M1 card.I'd like to replace the cards in different...

martap · 08-26-2018

Hi All, Looking for some advice, will appreciate if you can help. I run two OSPF processes and redistribute prefixes between them. I also run BFD to allow for faster failure detection which works great. What I notice is that in case of a link dow...

martap · 04-14-2002

Hi everybody..I have 3 sites (A, B, C) which are direct-connected to the centralPIX515 (A) over a ipsec tunnel. Remote clients can connect viaCisco VPN Client 3.5.1 to the central Pix (A) . Now I have the problemthat the remote client should have a...

martap · 07-07-2021

Hi Balaji, thanks for your response... However, the question was not if I can use different modules in the same chassis, but different modules in different chassis in the same site... So a M1 in chassis A and a F3 in chassis B, where they're part of ...

martap · 10-21-2018

Is there anyway to influence the MAXAGE timer? The reason I'm using 2 processes, is to get more control over the prefixes that I need redistributed.. with just 2 areas I'm severely limited with OSPF unfortunately. thanks for your help so far, ...

martap · 10-21-2018

I see… but the result is that for 15-20 sec, the traffic is blackholed which is what I’m trying to avoid. I assumed BFD would help me get quicker convergence (<1sec).

martap · 10-20-2018

Absolutely no problem, PaulFrom both… DB & RIB.

martap · 10-20-2018

I still haven't figured this one out... Any idea's from you guys?

Member Since	‎04-14-2002 06:10 AM
Date Last Visited	‎07-18-2021 11:57 AM
Posts	15

User Statistics

User Activity

N7K: OTV multihome using an M1 in chassis A and an F3 in chassis B

slow redistribution between OSPF processes

Routing between VPN IPSec tunnels on a PIX 515 (6.0)

Re: N7K: OTV multihome using an M1 in chassis A and an F3 in chassis B

Re: slow redistribution between OSPF processes

Re: slow redistribution between OSPF processes

Re: slow redistribution between OSPF processes

Re: slow redistribution between OSPF processes