Hi All, I have one observation other then routing issues.Sorry for discussing it here. Many times i have observed that telnet session thru vty shows user connected for more then the exec-timeout.Although we have given the exec timeout command in line...

Hi,How can we monitor PRI on MRTG which is terminated on CISCO 3600 series Router?We have terminated the PRI line on controller card.and our ISDN users use this PRI.If PRI goes down, we come to know from the users that they are not able to connect.An...

Dear All, We are using Cisco 3600 series back bone router at our office.And we have assigned many secondary IP addresses on Fast Ethernet port.And this is one ethernet bridge radio link. So we are not able to see the bandwidth traffic saperately on t...

We are using cisco3600 series router.Before some days there was no command for last configuration changed and NVRAM config last update like :Current configuration:!! Last configuration change at 07:44:06 UTC Tue Aug 13 2002! NVRAM config last updated...

I installed one WAN link on my Fast ethernet . It is of 128 Kbps. Now i want to set the CIR limit of 128 Kbps on it. How can i do it?I gave the command :rate-limit inupt 128000 16000 16000 conform-action transmit exceed-action droprate-limit output 1...