Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have a number of 1801's and 1803's setup at a group of sites, they are all using IPSEC to encrypt traffic between the sites.I'm having a problem when someone tries to copy a large (5mb or above) file from a MS 2003 server to a XP desktop ove...
Hi all,I'm hoping that someone can help with a strange PPTP / MS-Chap problem that I have. We are installing a number of Cisco 827H (now 837's) in our customer sites for Internet access and VPN's (using Ipsec).As an extra feature I would like to set ...
Hi All,I need to set up a VPN over ADSL for a customer, but it has to be able to carry IP and IPX (for Novell server access).I was thinking of installing an 827H, but I see I can't do IPX on the 827H, but there is a IOS for IPX for the 827 (c820-k9no...
Hi,I need to link 2 buildings that are about 100m apart and have line of sight between them. The link needs to be reliable as I'm running a low bandwidth (64kb) realtime app over the Tcp/Ip bridge.How reliable are the building to building bridges suc...
Hi,I've got an 801 acting as a callback server to a Cisco 3640, the problem is that the callback is taking nearly 10 seconds. I've set the dialer enable-timeout to 2 seconds and this works if the 2nd isdn channel is free. if the 2nd channel is in use...
I did start with a access-list 112 as below, but it didn't work so I removed the access-list . I've now removed the access-group 112 in command from dialer1.I've tried it with the virtual template unnumbered to Dialer1, but it's still the same. I've ...
Before I waste my time downgrading my 827H to 12.2.2.T4 can anyone confirm something.if a Crypto command doesn't work on 12.2.2.T4 on a 827H am I correct in presuming that the same command won't work on a 827 with the same IOS ?
The 827 would be ideal, but the IOS version with IPX is only 12.2.2T4, when I was testing the 827H I had to upgrade to 12.2.8-YM to get some of the crypto functions to work. I can't remember what functions wouldn't work I may have to reload an old IO...
GRE over IPSEC is the way I was planning to go, but what broadband routers support IPX ?I was under the impression that the 827 (which supports IPX) has been replaced by the 827H (which doesn't support IPX), The 831 looks good but it doesn't support ...
