Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Has anyone implemented SNMP monitoring of services for CSS? How do i go about doing it using HP Openview as the SNMP manager?I have read the SNMP configuration for CSS but still quite confused about setting the threshold for the RMON alarm. How do yo...
Hi,I have an E3 link b/w 2 sites. The E3 link is set up at both ends using a PA-E3 with a Cisco 7206VXR router. The PA-E3 module has an integrated DSU. According to the ISP, the E3 line is not terminated remotely with a DSU. In that case, should i us...
Hi,The configuration of the terminal server is as below:Current configuration:!version 11.2service password-encryptionno service udp-small-serversno service tcp-small-servers!hostname pn2-ext-termsvr2!enable secret 5 <removed>!no ip domain-lookupip h...
I tried enabling port channel on the GE ports on the Sup IIIG engine, i received a prompt telling me that the feature is not supported. Below is the output of sh version ->WS-C5505 Software, Version McpSW: 6.1(1) NmpSW: 6.1(1)Copyright (c) 1995-2000 ...
Hi Andy,The alias cmd would redirect all requests to your web server internal IP to the public IP. The DNS replies on the other hand, would be doctored by the PIX, so that the DNS reply to the inside clients would be changed to the web server interna...
Since you have allowed icmp in your ACL, i was thinking that it might be due to the following config which may be missing.[no] icmp permit|deny [] You can try putting in the above config to explicitly allow/deny an IP address/network to ping to the...
