Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can someone please let me know the MIB OID for the chassis temp. on the 4000 and 4500 series switch. I'm having fits getting into the cisco sw-center to look up the info. Thanks in advance.
From the sup can you ping 192.168.1.1--yes than add a passowrd to rsm vty 0 4 lineconf t ; line vty 0 4 ; password cisco ; ctlr zretest telnet from sup to rsm--no than ping 192.168.1.2also do a sh cdp nei and sh trunk from the supemail results to mer...
When I look over your sup conf listing I don't see any settings for the rsm in slot 2. Can you do a cold start with a console connected to watch the boot process also do the same on the rsm on a second cold start. We need to get the sup and the rsm...
Lets simplify the problem.Connect to a TX port (5/x) and assign an appropriate IP to the client 10.0.1.x or 10.0.2.x.Can you now telnet from the sup to the rsm?If yes then conn. to sup, telnet to rsm and ping the new tx client connect on po 5/x. Can...
