Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all, I'm facing a route flapping issue, on a setup with redistribution.We have OSPF running in the HQEIGRP running on the WAN, on top of a DMVPN setupWe have an other OSPF instance running at the partner side. As we have 2 points of redistri...
Hi all, Just upgraded a VSS pair of 4500-X from 03.06 to the latest recommanded version, 03.11.02.EFor any reason ssh has been disabled and all reguar commands to enable it have disabled. campus-sw01#sh license in-useLicense Store: Primary License St...
Hello,I’m working on a L2 compartment on which I have enabled Root Guard Switches 1, 2, 3 and 4 are Catalyst 6500Switches 5 and 6 are third party switches. Switch 1 is root of the first MSTP instance.Switch 2 is root of the second MSTP instance. I w...
Hello, Thanks for the details. I'm facing the same issue in my environment.We have been using ISE and 802.1x EAP-TLS on windows 7 laptops for 2 years and it worked fine.Now we are moving to Win 10 (1909), and some get "12935 Supplicant stopped respon...
Hi Paul, Thanks. Yes, I did implement the filters with tags, as you can see in the configs. The loop in fix! What I try to understand is why routing converges in 16.9, with a route from EIGRP EX (AD170) prefered over the OSPF one (AD110).This is not ...
Hi all, I managed to lab the design with CSR1000v. Here are the config files : http://137.74.196.165/confs-lab.zipThe lab design is the following: The routing loop is actually a normal behaviour, as we discussed.R2 (L0 2.2.2.2) cannot ping R1 (L0 1....
Hello Giuseppe,yes, this is the point.The AD of external EIGRP should be prefered over the OSPF one. I noticed that if I put a summary route on the partner routers, which is advertized with an AD of 90, the routing is stable.However I have some route...
