Hi Team, Need inputs on Cluster Sizing tool for CUCM. We are planning to consider the requirements of a Mega Cluster. Exiting cluster is 11.5.1 --> CUCM - 1 Pub 8 SubCUC- 1 Pub 1 SubUCCX - 2 Clusters - 2 Sub each( 1st Cluster in Location A and 2nd in...
Hi Folks, I am looking out if SCCP Phone have any constrains on SIP SRST GW. Please share if any one has faced or know about any issues. Regards,Vinod Dahiya
Hello All,I need some urgent help to create a design call flow for auto attendant with TCL scripts on Cisco 2921/51 router. This is a custom design requirement along with time of day routing. My customer already has default scripts loaded on same GW ...
Hello Everyone,
I need help on creating an auto attendant design call flow with tcl scipt on 2921 voice gateway.
Desired call flow would be as mentioned below:
Call flow details:
During 9 AM -12 PM and from 1 PM to 5:30 PM - Mon to Friday UTC...
Hi John,You need a CUCM with CUBE or a CME to register your endpoints. CUBE will be used to configure your ITSP/ Service Provider for SIP channels.CUCM--> SIP Trunk--> CUBE--> ITSPRegards,Vinod DahiyaTogether we can solve, Let's do it together.
Hi JR,Yes provided document have real good info from Wade.As you have worked on this tool in past, your experience is real handy here to understand on how to calculate and differentiate BHCA for Inbound and Outbound - PSTN , Inter cluster and Intra c...
Thanks for your inputs! Verified from other cluster, I can see CallActivitiesRep, PerformanceRep, Device Rep, Service Rep which shows cluster BHCA, H323, SIP trunk , MGCP BHCA and BHCC. In required custer, it is showing PerformanceRep of 2nd June(No ...
Thanks for checking this! I opened this discussion after verifying output at my end but let me re-login tomorrow in other cluster to see if it's an issue in only one cluster. At my end it was informing to click on link of previous date which gave dev...