Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Is it possible to apply QoS on Cisco routers to provide certain types of traffic priority within an Anyconnect SSL VPN connection ?The VPN will be established from users using mobile devices such as iPhones Thanks
Hi,Can someone please clarify the maximum throughput of a 2600 AP when using CLient Link 2.0. I see that the datasheet states that it is 450mbps, however, from my understanding of transmit beamforming (client link 2.0), when traffic is "beamformed"...
Hi,I have been advised by my service provider that to do ATM IMA I need an AIM-ATM and a VWIC2-2MFT-T1/E1 card, and that IMA is not support on the VWCI2-2MFT-G703 card.Can anyone confirm if this is true ?Thanks
hi,I am trying to setup a guest WLAN using a local controller and a controller in my DMZ using the mobility-anchor configuration.Ideally I'd like to use an external DHCP server in my DMZ, but for now, I'd be happy getting the local DHCP server on th...
Hi,I am using autonomous Cisco 1242 AP's with Teklogix terminals running Windows CE.The Teklogix consultant wants us to enable CCX support on our AP's so that the terminals stay connected to the network when they are in power-save mode.Can someone pl...
Hi and thanks for your response.My scenario is this.Mobile users (iPhone/Android) are connected to the corporate network and use Cisco Anyconnect to access internal mobile apps.Some mobile apps (such as voice/video) might require different packet mar...
I'm not "saying" anything, I'm asking becuase I don't know the answer and I'm trying to get a better understanding of how Cisco implement this technology. I thought that this would be the place to go to get the answer.The 1142 doesn't support clien...
I was researching beamforming and came across the following information(below), which prompted me to ask the question hereIf the below is correct, then is it also correct to say that the 2600 with client link 2.0 enabled has a max transmit capability...
Hi Scott,I understand your answer, my question would be when does the AP chose to "beamform" and when not, is there some specific criteria it uses. My understanding is that it does this all the time, and therefore, if it does, from my understanding...
HI Saravan.I believe that CLient link version 2 will support 802.11n clients as per the data sheethttp://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps12534/data_sheet_c78-709514.htmlCisco ClientLink 2.0 technology to improve downlink perfor...
