Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all.during AireOS days, we can see all APs with the number of clients connected.Nowadays that doesn't seem to be possible...in the Monitoring / Wireless / Clients - only shows where do I have clients, this is not the intentionin the Configuration ...
I have one single location where the users are complaining about wi-fi..They say Wi-Fi goes up and down, they flip flop between -256dBm (Very Low) and -57 (Excelent)end devices are mainly DELL laptops managed centrally. I tried to debug one of the cl...
Hi everyone.for a while, I've been facing an odd behavior in some APs.I have WLC 5520 (8.5.161.0) configured in N+1 and around 350 APs.The VPN concentrators are ASA 5545's.DHCP is an Infoblox (same subnet as the mgmt of the WLC). They are in the same...
Hello.on ISE Guest Access, I've setup change of password required after the first login.It works very good. After the 1st login the end user is invited to change it normally. What happen when the end user loses his password, he/she asks for a reset, ...
Hello guys.I've got one 5520 WLC with 8.5.140.0 with 154 2800 APs.My Cisco Prime is 3.4.0.0.348 build. I have enough licenses for these equipment. Problem: In Cisco Prime only 134 Aps are shown. they are all on the same controller and have the same ...
@Max-Amorim yes you can.. although 5508 is already outdated for many years.. I actually used this config analyzer with a 5508.PS: posta os conteudos em Ingles e teras uma abrangencia global. se tiveres dificuldade usa o google translator para passar ...
Guys, thanks for the helpis there any command to know the current Primary and Secondary Controllers?I want a show command and not a config command.Thanks!
Scott, thanks for sharing your thoughts. I found the dashlet option earlier, but I have to constantly go back to the home page, and filter the TOP Access Points, and Sort by AP's with Lowest Client Count... and again... limited to the 10 lowest clien...
Much appreciated your help.I changed the following in the Wireless LAN Card Settings1. Advanced/Preferred Band (Prefer 5ghz band) 2. Power Management/ (Do Not) Allow the computer to turn off this device to save power. the connection is more stable no...
