Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone !My topology is followClients -> |NAT-ed Router| --------- (INTERNET) ------- |NAT-ed Router of Head Office | --------- | ASA5550 (L2TP VPN Server) |--------- LAN- ASA5550 are working as L2TP VPN Server.- Clients are using Windows 2000...
Hello !I'm trying to test the following topology:Client ------ Server(win2k3) --------- (Internet)-------- VPN Server(ASA) ---------- LAN- Server running L2TP to connect to VPN Server (sucessful)- Client can ping to LAN after VPN tunnel is up when I ...
Hi all.please help!i have a problem. i don't known command to enable Spanning tree portfast on Switch Cat2948G. please see information about IOS verison and Platform of device?
Dear all !I have a plan to upgrade CCM form 5.1(3) to 7.1. After checking the compatibility matrix for Software and hardware, I found my CCM can upgrade to 7.1. However, I can not find the Part Number to upgrade from 5.1(3) to 7.1. only form 6.x to 7...
Hi All The following is my script for IVR. However, when User press "0" to operator, the system must wait for 7-10 seconds to forward "0" digit to CallManager.How can I make Script forward immediately "0" digit to CallManager ? ======================...
Hi Federico !Thanks for Reply. Because I add new route "route outside {Network address of Client} {Netmask} {IP Address of VPN on Server}" so Traffic from LAN of ASA did not forward to next-hop to reach Internet. The problem is that when traffic f...
the Spanning-tree portfast command not exist on this IOS.this is problem that i need all of you help.this devices is 2948L3 and very old.with you want add some port in to vlan, you must using "bridge-group " command.
Thanks for replying.The pattern I used is ".+" because I want to sent "XXXX" number to CCM. However, "0" is special character so I don't know how to solve this problem. Can you recommend the way to solve this problem ?(My system still working properl...
