Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,as per the datasheet, I only see the 40G and 100 interfaces. what about support of other transceivers, SFPs and SFP+ could anybody point me to that information If I could also use 10G or even a 1G Copper SFP with that switch?thanksray
HI there, I am wondering if the new MR45 and Mr55 are running with limited power means 802.3af like the old APs?of course with limitation in the amount of enabled radios and MIMO but at least run to ease transformation of large scale.
I have ordered an additional 5 licenses for a 2504 wlc. I also registered it with Pak key all worked fine but i can not get it to work.When i upload it from tftp it tells me it that it is allready installed. I have then tried to activate the eval lic...
Hi,I have two installation with WLC 4402 to Cisco Switches 3750. The Connection is Fibre with GLC-SX and channeld. The Problem I have is, tha 10% of the Packets are underruns. Has anybody encounterred the same issue? I also have two other installaion...
Yes, saw that with some of my MR55 as well.As I was told they will work in a reduced way but had issues I opened a SUPPORT case and was told. that the MR45 and MR55 are not working in 802.3af and would have strange behaviour.I was also told to have t...
now we are talking as we start to explain things using cars and motorbikes With gpoing mobile I would like to use the Wifi-6 APs connect them with mGig to MS355 and aggregate them on a core/distribution switch.that switch would also have WAN uplinks...
The following answer I got in the Wi-Fi 6 Webinar." All of our WAPs have 4 radios. The BLE and scanning radios won't work if you're on 802.3af. The client serving radios will still have enough power to serve client devices.
