Hi,We have problems with our hsrp failover. We are running HSRP v2 between a nx7k and a 3560.The configuration is (BGP configuration omitted) :NX7k:interface Ethernetx/x   ip address x.x.x.2/x  no ip arp gratuitous hsrp duplicate  hsrp version 2  hsr...

Hi.We have configured the route-reflector feature, but the "loop prevention" mechanism is still supressing multiple routes to the same destination."By default, all internal BGP (iBGP) speakers in an autonomous system must be fully meshed, and neighbo...

Hi.Why do I see voice traffic on one router and not on another:Class-map: VOICE (match-all)          0 packets, 0 bytes          30 second offered rate 0 bps, drop rate 0 bps          Match:  dscp ef (46)          Priority: 25% (9900 kbps), burst byt...

Hi.We have BGP challenges. See the output below:-core# sh ip bgp 0.0.0.0 vrf vrf_brukerBGP routing table information for VRF vrf_bruker, address family IPv4 UnicastBGP routing table entry for 0.0.0.0/0, version 396Paths: (1 available, best #0)Flags: ...

HiRoutes are not installed in the routing table.Se the following output:                 core# sh ip bgp 0.0.0.0 vrf vrf_brukerBGP routing table information for VRF vrf_bruker, address family IPv4 UnicastBGP routing table entry for 0.0.0.0/0, version...