Hi Guys, has anyone seen this issue on viptela cloud vedges init-in-gr. this is on 19.2.2 and 19.2.3 BR2-R1# show omp peersR -> routes receivedI -> routes installedS -> routes sentDOMAIN OVERLAY SITEPEER TYPE ID ID ID STATE UPTIME R/I/S--------------...
Hi Guys,Any thoughts that my Cisco Air-AP1852I-B-K9 v02 not getting poe power from 3850 UPOE switch?I am using 1852i as ME and have tried (8.3 and 8.4,8.5) images with no luck. 3850 uPOE XE version is 3.6
HI Leo, tried that with no luck. Looks like AP not responding at all to POE sh versionCisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.06.05.E RELEASE SOFTWARE (fc2)Technical Support: http://www.c...
further more debug *Nov 24 04:21:57.868: ILP:: Gi1/0/1: State=NGWC_ILP_DETECTING_S-2, Event=NGWC_ILP_IEEE_DET_SHORT_EV-29*Nov 24 04:21:57.869: detected short from IEEE. still waiting to hear from phy Gi1/0/1
here you go Leo show cable-diagnostics tdr interface gigabitEthernet 1/0/1TDR test last run on: November 24 03:51:41Interface Speed Local pair Pair length Remote pair Pair status--------- ----- ---------- ------------------ ----------- -------------...
Hi Scott, yes cdp is enable. port come up with same cable or different Ethernet cable to any other ap but only this AP 1852i brand new poe does not pick up
HI Scott, thanks for reply, enough power is there. just with single AP 1852i does not working on POE. with Power Adaptor it does work.Tried with 3560 and 3650 poe as well no luck.
