Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having issues getting this to work. For email, I have mail.xxx.xxx DNS'd to 165.165.165.165. I want it to come in to 10.1.0.31. It needs to go out a cluster of 10.1.0.31, 10.1.0.34, or 10.101.201.31 but look like it came from the 165.165.165....
I am trying to set up a site to site vpn using pre-shared keys from an asa to a pix. I have read countless forums and cisco documents but nothing seems to be exactly what I need. I used the following as a baseline: http://www.cisco.com/en/US/produ...
I have an issue with connectivity between an HP 5412zl and my Cisco Switches (2950’s and 3524’s) The HP serves as the core with all of the Cisco’s connecting back via fiber. The Ciscos are passing traffic but I cannot ping nor telnet into them. Fiber...
I have a WS-C3750G-24TS-S that is getting IPC Open Port Errors. Can anyone give me an idea of what needs to be done to fix them? I was asked to look at this switch as it was taken out of service of one of my company's client's. It would go up and ...
I need a visio stencil for the 3500XL series switches. I've found the ones offered on the cisco site for 3500 series switches but they are only for the 3550 switches. Can anyone point me in the right direction or happen to have the old 3500XL stenc...
I have this checked on both my wireless and wired connections properties but it still doesn't enter the VPN tunnel. The ASA shows me connected but no encrypted traffic passes.
I am having this same issue. I am running Windows 8. Until recently it worked fine but now when I try to connect it sets up the connection just fine but I can't access anything. If i do this on a VM under VMworkstation on the same laptop, I can co...
This is a pretty old post but I was having the same issue. I found that if i removed the crypto map from the outside interface, removed my unwanted cryptos, added my new crypto commands, and then re-applied the mapping, then i had no issues.In this...
10.10.0.0/16 is interior of ASA10.10.100.240 - 10.10.100.248 is remote access vpn client pool on ASA192.168.1.0/24 is interior of PIXremote access vpn users have had no problems in the past connecting to the main site to end points on the 10.10.0.0 ...
I had been pinging from the pix and not getting a return. It seems the VPN is actually working once I plugged my laptop into the inside interface. I can rdp to the inside address of a server on the main site.On the NAT exemption, maybe i'm reading ...
