Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
A client has two Organisations within a single site and wants to use CME on a 2800 ISR router. Can the two PSTN connections be connected to the single 2800 ISR and more importantly can outgoing call costs be identified for both companies using a sin...
Does anyone know if I can use the AIR-ANTM2050D-R dual band 2.4/5GHz antenna on the 1232AG access point. If the answer is yes, which RP-TNC connectors is it connected to. (2.4 or 5GHz). Also do I need two antennae per AP for diversity.
having trouble enabling Client Tracking. If I check the radio button for “Enable Client Tracking on all WDS Devices”, I get no errors but find that Reports>Wireless Clients gives no details even after several days. If I change the drop down to “Clien...
Thanks for your reply.The reason I posted the question was due to the dual band antennae not being listed on the supported antennae URL you also listed.I think the dual band may be recent additions from the Airespce product range, hopefully also supp...
There is no definitive answer to your question. There is no "standard" height as this will vary from site to site. The angle of antenna will also depend on the radio propagation required. A detailed site survey will always determine both your requ...
Working in the cabling industry for many years, the answer is definitely Yes. Guaranteed performance, dedicated bandwidth, new technology supporting 10Gb, PoE,secure media, all available on copper solutionsOver wireless, doubt it.
Mu understanding was that only the 1100 series would be able to use the 802.11b OR the 802.11g radios.The 1200 series could use the 802.11a AND 802.11b at the same time.From the above replies it seems that the 1200 may also use 802.11b AND (802.11a O...
