Buy or Renew
Buy or Renew
martaylor
Level 1
Level 1
Member since ‎04-23-2003
‎12-18-2019
Recent Badges
Awards

User Statistics

  • 16 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
See all
5 Discussion Posts
First Discussion
First Question
10 Discussion Posts
1 Reply
5 Replies

User Activity

Nexus 9K REST API authentication using ISE

12-13-2019
HelloCan anyone help with a config issue I have.A customer has requested REST API access onto their N9Ks using the role=nxdb-admin.All access to the N9Ks is via TACACS using an ISE running 2.4 I have tried to setup a new TACACS profile on the ISE for...

Wireless AP authentication using an ISE as a AAA server

07-18-2016
Hi On a WLAN network for one of our customers we only allow APs to connect if they authorise against a AAA radius server using the mac address of the AP ethernet interface as the username and password. Currently we do this using an ACS as the AAA rad...

Access Point AAA authentication using ISE

07-08-2016
Hi On a WLAN network for one of our customers we only allow APs to connect if they authorise against a AAA radius server using the mac address of the AP ethernet interface as the username and password. Currently we do this using an ACS as the AAA rad...

Flexconnect local switching using dynamic vlan assignment with ISE and MDM

01-25-2016
Hello I am looking for advice on how to configure a WLC to use dynamic VLAN assignment when the access points are in flexconnect with local switching. We have a central 8510 and APs at several remote locations. Each AP is trunked locally at the site ...

average per user bandwidth

10-07-2015
HelloDoes anyone know what the rough rule of thumb would be for per user bandwidth on an AP, assuming its connected on a 1Gig port and is a 2600/2700 type API am sure I read approx 500K per user in the past ThanksMartyn
View more
Community Statistics
Member Since ‎04-23-2003 06:50 AM
Date Last Visited ‎12-18-2019 12:07 AM
Posts 16