Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
scenario:core routers connected via vlan 15 to a pix device. everytime a route is specified i used the next hop as vlan 15 ( the interface) rather than the ip address of the PIX device. is this a security issue and would it be a issue with proxy-arp?...
Hello All,Never seen this behaviour from a tacacs+ server before. can someone who had a change to fix this help me here.show tacServer: x.y.z.w/49: opens=11 closes=11 aborts=0 errors=0 packets in=11 packets out=11 timeout=0 connection_fails=0 ...
hello all,we have 4 3750s in our isp environment. i observed two weird things. the config-register shows "0xF". i dont have a config-register command in Global config mode.hostname#show verCisco Internetwork Operating System SoftwareIOS (tm) C3750 So...
hello all.i have a 2620-RPS. it had a dc input to go to a RPS and it blew up. so i used a ac power supply. the router powers up. i have a 32 meg dram simm and a 16 meg flash simm on the router. every time i reboot it comes up sayingSystem Bootstrap, ...
Hi All,I have a 1.5 meg adsl terminating onto a 827 cisco router. on the ethernet i want to rate--limit a ip if possible to "x" amount of bandwidht or if thats not possible then i want to have a policy setup in such a way that the precencedence of pa...
I currently have a similar problem. our 7600 is connected via the gigabit ethernet on slot 5/1 and it terminates on a 3524 cisco catalyst. the catalyst can see the 7600s mac address but the 7600 cant see the 3500. i dunt understand what the problem i...
I currently have a similar problem. our 7600 is connected via the gigabit ethernet on slot 5/1 and it terminates on a 3524 cisco catalyst. the catalyst can see the 7600s mac address but the 7600 cant see the 3500. i dunt understand what the problem i...
I currently have a similar problem. our 7600 is connected via the gigabit ethernet on slot 5/1 and it terminates on a 3524 cisco catalyst. the catalyst can see the 7600s mac address but the 7600 cant see the 3500. i dunt understand what the problem i...
Hi subbarao,thanks for the reply. correct me if am wrong. but isnt cbwfq applied to the vc. i tried to look in he config guide and dint get much help on wat i was after.am still lookin in the guide to see if anithing helpswill post soonthanks anyway