Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have been using VLAN 1 forever as our device management VLAN. In trying to move off the native VLAN and into what I have been told is best practice, I am trying to setup switch IPs on the management port, on my 2960 devices it is F0.
I created a ...
We have been using VLAN 1 forever as our device management VLAN. In trying to move off the native VLAN and into what I have been told is best practice, I am trying to setup switch IPs on the management port, on my 2960 devices it is F0.
I created a ...
I am having the famous and much discussed issue of ASDM and Java 7 not being compatible. You launch ASDM and it hangs. To resolve you install the older, archived version of Java 1.5 or 1.6 and it works. My question is - how come Cisco has never seen ...
Hi All, I have a 6509 that is the L3 for one building and a 4900 that is the L3 for another building.I have 3 VLANs on each core in each building: VLAN 2 testVLAN 3 staffVLAN 4 guest Each of the VLANs is actually managed by the respective L3 switch t...
I have ACS 3.2 and a bunch of TACACS configured Cisco devices. I want to give a limited set of access to techs the environment to modify VLAN assignments of ports.So they would need to be able to access privileged mode, but only execute things like: ...
One more question. This one may be silly..I have configured a trunk port back to my L3 core, do I need to plug the management port into a port on the switch itself? So does the management port get plugged into one of my access ports that is assigned ...
Just so I am clear, there is no reason a 10.1.4.0/24 network that has SVI on the core (10.1.4.1) should not be able to ping my 192.168.2.0/24 network that has an SVI on the core (192.168.2.1).
I planned on giving all the management ports for my Cis...
So quick question, If I put my cores both back into VTP server mode - will they still only manage their respective domains? There is no change, regardless of revision # that a vlan.dat can be over written by the other VTP server if they are on diffe...
I created the VLAN (725), however the trunk between the two cores gives me a VTP domain mismatch error.The two core are different VTP domains. I did recently set both the cores to Transparent mode.However, I am still getting a domain mismatch. In tra...
So I added the the following IP route on the Actiontec router:Name: Home/OfficeDestination: 10.1.10.0Netmask: 255.255.255.0Gateway: 192.168.1.3Metric: 0I am able to ping internal devices connected to the 3750 and routed via SVI. For example, the Act...
