Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi AllWe have a customer with CallManager 4.1(2)es15 and they bought the 3&3 promotion to go from 4.1 to 8.0. They have 30 IP Phones and 314 Analog Phones.This is what the customer bought: 1CUCM-USR-LICTop Level Sku For User License50MIG-CUCM-USRUpgr...
Hi TeamI need your help with the following question:We are preparing a design to one of our customers, using Catalyst 6504-E with VSS, and a Firewall Service Module (FWSM).Based on this document, the minimum IOS release required is 12.2(33)SXI:http:/...
Hi TeamI need your help with the following design:Right now we are working in a design for one of our customers, and we want to offer them 2 6504-E, with the Virtual Switching Technology.These are the components:- (2) Switches 6504-E, each switch ...
Hi People!We need your help with the following question:We need an Auto Attendant in our company, so we are interesed in the NME-CUE module with Unity Express 7.1. We don't need any voicemail, just the Auto Attendant feature for callers to listen to ...
Regarding the NM-HD-2V, it has embedded DSP right? Is that a disadvantage vs using the onboard PVDM of the router?. In our case, we have a 2911 full of HWIC cards, and the customer requires 8 additional FXO. So one solution we are evaluating is using...
Hi SriniThis is an old post, but I have a similar situation where I need to configure several FXO ports on a Router. Is there any difference in using EVM modules instead of NM-HD-2V?Thank you,Annya
Hi JamesWhat about if I use Table 9 to order UCS-C210M2-VCD2 based on DC SKUs, can I order 6 - 8GB DRAM instead of 12 - 4GB DRAM? Does it be accepted as a valid TRC configuration?http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/...
