Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, Very annoying behavior between a C3650 (IOS-XE 03.03.04SE) and a C2950T (121-22.EA14) . I have an MST spanning-tree with 2 instances (MST0 and 1). Same configuration in both but as soon as connect the C2950T on a simple trunk (copper wire CAT6...
Hello, I'm not able to redirect my output from a show command to a TFTP server. Since I'm already using and output modifier in my command line, the redirect command does not work.Ex:show mac addr dyn | ex show|Port|Table|--|Po|/23|/24 | redirect tftp...
Hello, I would like to split up the MST into 2 instances, one for my datacenter and the other one to the rest of my lan. I want to limitate STP movement in my DC.In my DC, I have a Catalyst 4510E, Nexus 5010 and a few other switches (2960G)... Do I ...
Hello everyone, I would like to have pointers how to migrate from WLC4404 to WLC5508. I want to know your propositions.I could replicate the configuration manually but there is a lot of confirugation menus and all. If both could be online and migrate...
Hello everyone, I was wondering why can't we no longer use the multiple ports within an extented ACL like I use to do it in a CAT3750E I have IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.02.00.SG RELEASE SOFT...
Hello, The config are in the attached files. Here's the result for "show span" in both switches when I connect them together. C2950T-1#show spanning-treeMST00 Spanning tree enabled protocol mstp Root ID Priority 32768 Address ...
Here you go...access-list NAT_exemption line 1 extended permit ip 10.0.0.0 255.0.0.0 205.237.80.0 255.255.255.0access-list NAT_exemption line 2 extended permit ip 10.96.10.0 255.255.255.0 205.237.81.0 255.255.255.224access-list NAT_exemption line 2 e...
Hello again,Well, it's truly my switches connected as access that do cause this issue. Since it's one of the following :MST Configuration Restrictions and GuidelinesFollow these restrictions and guidelines to avoid configuration problems:•Do not disa...
