About Geoffrey Marissen

Geoffrey Marissen · 07-04-2017

Hello, I wan't to clear a view things out and also have some question about a not working configuration. First of all the QoS config i set on a router. !class-map match-any CM-QoS-Gold match access-group name ACL-QoS-Gold!policy-map PM-QoS-Gold cla...

Geoffrey Marissen · 06-27-2015

Hello guys and girls, I have this problem, it’s a brain cracker to me.. so I hope you guys or girls can help me out here... Have a company with a HQ and a branch.The HQ has a subnet of 10.1.18.0 /24The branch has a subnet of 10.2.18.0/24There is a I...

Geoffrey Marissen · 05-11-2013

Hello,A cisco noob here. At home I have a small test lab with a 877, this 877 is connectect with the fa0 to my service provider router. I want to configure a DNS server, but when I do I can ping to a DNS name from my 877 but nog from my client. I hop...

Geoffrey Marissen · 07-06-2017

Reguarding DHCP the debug isn't very clear to me but I noticed that lease is 5 minutes: 000124: *Jul 5 16:38:11.207 CEST: Lease: 300 secs, Renewal: 150 secs, Rebind: 262 secs so I suppose that BVI looses the IP every 5 minute because the lease is o...

Geoffrey Marissen · 07-06-2017

router has no route or routing protocol, I guess routing is to the default gateway learned by the DHCP, really unusual in my experience Yes why you didn't just config an IP address for BVI instead of using DHCP ? It's easier to roll out DSL routers t...

Geoffrey Marissen · 07-05-2017

This is the output of a debug dhcp detail: 000117: *Jul 5 16:38:10.207 CEST: DHCP: Client socket is opened000118: *Jul 5 16:38:11.207 CEST: DHCP: QScan: Renewal..T2 fired..Rebinding000119: *Jul 5 16:38:11.207 CEST: DHCP: SRequest attempt # 1 for ent...

Geoffrey Marissen · 07-05-2017

Enrico, Because we are a managing our own WAN, i rather not put a network draft on here. I'm a little bit confused about the network architecture. BVI is the WAN, right ? And it gets its IP address via DHCP ? Yes Without the policy-map everything w...

Geoffrey Marissen · 07-05-2017

Just watched another CBT nugget on this topic, where they explain it all. So the "bandwidth percent" is not a question any more. Its guarantees at least the minimum of bandwidth specified in the command. But still the configuration does not work:(

Member Since	‎05-11-2013 03:34 AM
Date Last Visited	‎05-17-2018 01:52 AM
Posts	24

User Statistics

User Activity

QoS | question about "bandwidth percent" command and working of QoS

IPsec with ip nat inside source static

877 DNS problems

Reguarding DHCP the debug isn

router has no route or

This is the output of a debug

Enrico,

Just watched another CBT