Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Im adding a router to radius authentication. Configured identically to the other gear (Its a juniper srx1500)
This is the error I get
Source Timestamp2018-08-08 13:38:28.26Received Timestamp2018-08-08 13:38:28.26Policy Serverlax-net-ise1Event540...
So we have a pair of firepower/NGfws (asa 5555x) and we are upgrading our internet connections in 3 locations...2 of which are getting a new IP space. We do ALOT of stuff on our firewall, aside from NAT for outbound web surfing, we have statics for ...
ise broke a couple weeks ago...it was restored from tape last monday. We are seeing errors on ISE that our logins to some network gear is showing up corrupted or a possible shared secret problem...so my boss wants me to change the shared secret on t...
Im in a new job, tons of tribal knowledge, but Im working on a serious authentication issue. We have a pair of WLCs running in redundant mode. The IP address associated with the active unit is what is listed in the network devices tab. None of the...
I have now had 2 weekends ruined by a botched ISSU upgrade on 2 pairs of nexus 6004. We are going from 6.0.2.N2.2 to 7.0.5.N!.1 and each time I encountered a bug. Last week it was an igmp snooping bug. Turn off igmp snooping and it will be fine. ...
I just came across this. We run WLC 5520 and ise 2.1 (as a vm). We had a user, droid 7.1, was having problems with getting on the wifi. I suggested he forget the network, then login again and do NOT choose "System Default" or "system certificate"....
So now I was able to change the shared secret at the ISE server, our NPS server and the WLC. We are starting to get Radius errors on ISE from the WLC complaining about shared secret issues....I made a shared secret and copied the same one to each de...
The interface I am most interested in right now is 3/17Gi3/17 on disagree desired off 0 0show interface:switch4#sh int gi3/17GigabitEthernet3/17 is up, line protocol is up (connected) Hardware is Gigabit Ethernet Port, addre...
