Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In the coming days I will be attempting to connect two sites with a VPN tunnel using two RV180W's, these sites have Frontier as their ISP using the ZyXEL P-663HN-51 DSL modems at both locations.I need to put these two modems in bridge mode, I founfd ...
Our WAP321 was working fine for about a month when suddenly no one could connect, this is using Radius and NPS, below is what's logged within the logs of the WAP321 web gui:Aug 9 2013 05:07:58 info hostapd[1120] wlan0: IEEE 802.11 STA "mac_address...
Customer is recieving a new IP address and gateway.Equipment involved:1. ASA 55052. Windows Small Business Server 2011 / Exchange 2010The DNS servers will not change.Looks like a call to the ISP to change the MX record, but what then? I can make the ...
I just purchased a Cisco SG300 managed switch and would like to seperate my network into two VLAN's, one for my lab environment and the other for everything else.I have the switch in L3 mode and and been reading the admin guide but I'm still at a los...
Trying to configure an 891-W on my home network.Basic TW cable modem ---> 891-W with DHCPI have done the following and are getting an IP address but no internet.I have FE8 set as DHCP and VLAN1 as 192.168.1.1 255.255.255.0I originally thought that "W...
I'm taking the static IP that I purchased and using that as my static IP address on my laptop, it's the only way you are going to connect if you are going to connect directly to your ISP's modem, if I did not purchase a static IP address then I coul...
1. No the zyxel is not giving me an address, I had to statically map my laptop with the IP address (static one given to me), subnet mask, default gateway and DNS in order to get out.2. I tried the "static WAN" route on the RV180W but that did not wor...
Well it all worked well but one issue arose.At location 2 they have a static IP address, when I look at the attached RV180W it does not show that IP?If they lose power or cycle that RV180W they could obtain another IP address which I do not want.I kn...
Wanted to update with some recent content.As for the PPoE settings, the current Frontier device at location 1 looks like PPoA? At any rate they are sending out a new device to location 1 (Netgear B90-755044) I'm hoping this device can be easily bridg...
OK this is getting rediculous really, I mean is it that hard to seperate network traffic? I created another VLAN (5) and it shows up as having no IP address and a status of "not received"? How in the world is VLAN 10 working but not 5 and 1?http://sc...
