Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How is inter-VLAN routing even supposed to work? Especially with non-Windows hosts? After setting up VLANs and interfaces for the VLANs on the switch (sg350), what am I supposed to do now? It just doesn't work. On the NAS device for example, I set up...
How do I configure one of the ports in SG350 switch to allow me to access the webUI? Because the webUI through one of the ports is the only way I can configure the switch, but as soon as I make any change to the IP interfaces at all, I lose connectio...
I have a router (with dd-wrt) that is connected to WAN, and I have an SG350 switch which I want to connect to that router to share its internet connection. How do I actually implement the IP configuration between the router and the switch so that the...
So adding1. a static route to the internet in to the switchand2. a DNS server address to the PC NIC,allowed me to connect to the internet. From my PC>>through the switch ethernet port>>through the VLAN (interface)>>through the routed port(layer 3)>>t...
Kind of funny that W10 is even able to fetch the name of the network that the router is connected to, but I can't load the router webUI (with or without FW) nor connect to the internet or even ping from the VLAN interface to the router like I said be...
The WAN side I should already have configured. By networks and subnet masks do you mean the IP ranges or something else? Right now I have configured a routed port connection between the switch and the router, and I can successfully ping between the p...
