Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can someone lead me to good articles in relation to understanding/configuring VLAN assignment? i.e. one SSID assigning vlan based on AD group and/or network location?
An issue just crept up and I hoping to post here for some clarification. We have multiple vlans but only two are being effected.vlan 26 - 10.10.26.xvlan 27 - 10.10.27.xboth configured with ip helper-address 10.10.16.45Nobody currently can recieve dh...
Hello, I have an issue connecting all four SFP's on my 4404's (I have two). Currently I only have two of the SFPs connected on each controller and each controller supporting 50 AP's. When I connect the third SFP port (dot1q trunk and switchport mod...
I currently have a CIsco 1310 which seems to have died. For some reason it wont boot. No bootable files found. When trying to TFTP an IOS to it I keep getting Invalid Argument. Can anyone please help me with what I might be doing wrong. Thanks i...
Removed the command but still no go.We have around 60 vlans all using the 10.10.16.45 as the helper with no problems. All are using appletalk zones as well.These 2 vlans are the only ones with this problem.These vlans are not new either. It just st...
Here is the config on the 6500 for the vlan interfaces:interface Vlan27 ip address 10.10.27.1 255.255.255.0 ip helper-address 10.10.16.45 no ip unreachables appletalk cable-range 27-27 27.1 appletalk zone Business appletalk getzonelist-filter 602 mls...
Nowhere do I see ip helper addresses anywhere else. No other boxes using 10.10.16.45 (dhcp) out there. (When I disconnect the DHCP box I get no (ping) responses)vlan 26 user>vlan 26 port>ip helper-address on = no addressvlan 27 user>vlan 27 port>ip ...
