I have a pretty straight forward change I need to make to several devices at one site; I need to change the OSPF process ID. The site has 2 edge routers, 1 L3 switch stack that connects all 3 floor IDFs all via OSPF. All devices are using the follo...
Hi,
I have a few production Site to Site VPN Peers, one of these peers, the vendor is requesting if we can adjust our window size to 1024.
I found this bug, that is has a workaround for flexconfig, but I'm curious if you can apply that to only th...
Hi,
I currently have DHCP snooping enabled on a site switch stack, as follows:
ip dhcp snooping vlan 20,90,100,200,400
no ip dhcp snooping information option
ip dhcp snooping
DHCP snooping is working fine, no issues, but I need to modify the vl...
Hi,
Was looking for a way to kickoff a script to upgrade the IOS of switches on my network.
I have a large number of devices that need IOS upgrades, and was looking at way to kick off the upgrades in groups.
What I'd do before the IOS upgrade is...
Hello,
Sort of a shot in the dark to see if this issue can be solved, but worth a try. I'll say up front, I'm too familiar with our VOIP system, I primarily manage the DATA network only.
Issue is, we use Cisco CP 8851 phones throughout the organ...
Thanks! I've been reading up on any effects, and haven't seen anything that could pose an issue, so I agree. The only piece I don't like with the FMC/FTDs is having to make the adjustment via flexconfig.
Hi, yes, the crypto map for the peer that you're trying to keep up, the static route host ip must fall within that crypto map protected network otherwise the peer will not stay up as the static route has no ipsec acl tied to it.
For example this s...