About anthonyg2879

anthonyg2879 · 12-21-2022

Hello Team, Is anyone able to provide an area of direction to get the above error resolved? Error: Reservation install file failed: The Reservation Authorization Code does not match the Reservation Request Code Everything looks correct on the Smart S...

anthonyg2879 · 03-17-2017

I have worked on lower end Cisco 1900 routers and it seems the syntax needed on the ASR1001-X is different. Can someone provide some guidance on how to build the same network 16.0.0.1/24 on Ge0/0/0 and Ge0/0/1 under a common VLAN, so two firewalls ca...

anthonyg2879 · 05-20-2015

I know how to setup PUTTY when using DB9 or DB25 rollover cables with COM port but what are the steps when you use a console cable that has rj45 connectors on both ends?

anthonyg2879 · 12-22-2022

Thank You for the direction. Yes, that is the process i followed. I was able to activate the three other switches in the stack successfully but just that one i am getting that error. I am trying to troubleshoot on why i am being told that error. Is t...

anthonyg2879 · 05-24-2015

Oh ok, I was under the impression that console (rollover cables) now came with an option of rj45 connectors on both ends and the pin layouts were set in a way to be able to console into router without serial connector or USB adapters.

anthonyg2879 · 05-24-2015

I read the Cisco console kit comes with a rollover cable with rj45 connectors on both ends. Can that be used to console into the router and if so what setting do u input in PUTTY?good idea as most laptops do not have serial connectors and many people...

anthonyg2879 · 02-03-2015

You have the steps to telnet from PUTTY into the LAN interface?I see you stated you were able to complete that task.I do not have a router present and wanted to give directions to client.

anthonyg2879 · 02-03-2015

Try remove vty statement and drop in a simple one for right now ...See if that works ... then you can lock down more.line vty 0 4session-timeout 30exec-timeout 30 0password 7 templogintransport input all -> make sure this is present.!

Member Since	‎11-12-2007 07:17 PM
Date Last Visited	‎12-29-2022 06:19 AM
Posts	9

User Statistics

User Activity

Reservation Authorization Code does not match Reservation Request Code

cisco ASR1001-X - Having two ports run same network on common VLAN

What are the steps in PUTTY to console into router with a RJ45 to RJ45 rollover cable which Cisco provides?

Re: Reservation Authorization Code does not match Reservation Request

Oh ok, I was under the

I read the Cisco console kit

You have the steps to telnet

Try remove vty statement and