Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, currently i am planning to do CUBE redundancy with HA.i've read this documentation:https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-border-element/112095-cube-hsrp-config-00.htmlOn that documentation, 2 CUBE con...
Hi All, currently deploying cme (aslo act as cube) with sip phone then connect to itsp sip trunk. topology as below:ITSP --- (sip trunk) --- CME (CUBE) ---(register using sip)--- ip phones call from itsp to ip phone and ip phone to itsp already runn...
Hi All,
need help related to b-acd, i am new about this.
if i call to pilot number, there no tone then call disconnected
already configure based on cisco doc:
applicationservice aa flash:bacd/app-b-acd-aa-3.0.0.7.tclparamspace english index 1para...
Dear All,
our customer want to log their chat history.
i already read this document
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/im_compliance/10_5_1/CUP0_BK_IFBE75ED_00_imp-im-compliance-guide-105/CUP0_BK_IFBE75ED_00_imp-im...
Hi All,
i recently installed cucm v 11.5 and imp 11.5 in our client. we are not using ldap, instead we create local user in cucm.
i fail if try to login from jabber windows automatically. i already add the srv record, already discovered, but when i...
Already done,
i just need to delete some configuration in voice service voice to be:
sipbind control source-interface GigabitEthernet0/0/1bind media source-interface GigabitEthernet0/0/1
and incoming call work perfectly.
