need to know the license means which has been shown "Evaluation mode" in attached snap shot at Fabric Manager and its remedy. ... View more

In respect of Audit cocnern, a customer demands to place CUCM 8.x behind Firewall currently it is positioned without any involment of firewall. Please answer below mentioned quries , make note there are around 2000 active users.. would be any issue if we place Cisco Unified Call Manager (PUB) behind Firewall... Won't be any performance impact on either side Cisco Firewall or CUCM..as all traffic will pass via Firewall.. Any practicle example you noticed or observed any where... Is this the right approach in security point of view or we don't need to involve hardware firewall in Voip... What is recomended by Cisco in this case.... As per my understaing, in voice communication CUCM only be involve to establish the Voip Call once call established the communication will be directly between cisco extensions.. similarly firewall will also be involve while establishing call otherwise it will remain ideal... ... View more

I have my core router IP is 192.168.1.1/24, in case attacker assign same IP 192.168.1.1 on any host in same VLAN segment of 192.168.1.0/24 then my router will down or inconsistency arrive on network. Any idea how to restrict/ block critical device IP assigment on network ... View more

        Switch 3750x (IP Services)           policy-map test class class-default   police 512000 16000 exceed-action drop interface GigabitEthernet1/0/23 switchport access vlan 595 switchport mode access spanning-tree portfast service-policy input test end interface GigabitEthernet1/0/24 uplink port no switchport ip address 10.100.100.2 255.255.255.252 end policay map is working but not limit truely bandwidth to 512K, above config provide max 1.4 to 2MB Mb/sec. But when ever I applied the same service-policy on Gi1/0/24 it limit bandwidth to 50 to 100K. interface GigabitEthernet1/0/24 uplink port no switchport service-policy input test ip address 10.100.100.2 255.255.255.252 end Please advice the correct way which limit bandwidth to 512K. ... View more