About stuartj

stuartj · 09-17-2004

I segmented a piece of my network off into a vlan from the rest of the VLAN1 (currently its all flat). The Client gets an IP address from the Novell DHCP server, but the client cannot see the tree or log in.I have IP helpers on my newly created vlan ...

stuartj · 06-05-2002

I want to create a 128 3DES tunnel to my PIX at work. The manual says that it is possible to connect to Cisco PIX Firewalls which was the main reason I bought it.Does anyone have any idea on how to setup the PIX to allow the connection in?

stuartj · 09-17-2004

We had to hard set the speed on the Novell Servers to get it to work with the 3750's. The 3750's were set to AUTO speed and duplex, and then we hard set the Novell servers to 1000 FULL. This corrected the problems with the errors we were seeing. Have...

stuartj · 09-17-2004

On your router where your VLAN1 lives, make sure IP CEF is turned on and then add this command to the VLAN1 interface (probably FA0/0 or FA0/1 where your gateway is at)ip verify unicast reverse-path This feature checks each packet that is routed into...

Member Since	‎06-05-2002 04:56 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	6

User Statistics

User Activity

VLAN with Novell

Linksys VPN Router to 525 PIX

Re: Speed problems with novell v.s. catalyst 3750 switch

Re: Too much unicasting going on