Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have vWLC installed at data center and 5 brand new 2600 wireless APs in the remote office. The APs in remote office get IP and DNS from the local LAN. I tried to let AP initally join the vWLC by layer 3 since it's hard to get vWLC and AP in the sa...
I can't configure the SSID more than one in the web UI of the WAP4410N. Except I can type the first SSID1, the rest SSID2 - 4 are grey which not allow me to type in anything. ( See attached the screen shot ) My current version is 2.02.1 and I was usi...
Hi,I have pix515E and 2 pix535(failover), both running on pix6.3, every time when I build up L2L vpn tunnel with the other end, I can not through ping, from my encrypto server to the other side encrypto server, to initiate phase 1 isakmp SA, instead ...
Hi, I have a 7606 switch using GBIC fibre connection to the other site switch through SP. Both ports configuration are trunk mode,I can't ping the other site switch SVI from my SVI(both are on the same subnet and VLAN), but SP switch in the middle us...
Thank you for your reply. Actually I tried every measures you mentioned above. I also tried login from a different PC which has xp installed, still got the same result. I guess I will give up this and see if I can get a RMA from Cisco.
Hi satish,The problem is I can only see my site switch (7606) which I already paste the configs upper, I can tell my site the configs is correct, and also according to the testing result I guess the opposite configs should be fine, and I can't unders...
