Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good mroing chaps.I have a security licence on a Cisco 1921. I do not have an application license.I am using zone based firewall. When treating a class map if I do a "normal" one - I am able to match on the P2P protocols:Class Map match-any ALL-P2P-P...
Anyone doing this? I can seem to find any documentation regarding a mixed stack AND a netflow module. If you have a pure 3750-X stack you can run the module in any switch - it doesn't need to be the master. But what if half the switches are 3750's a...
3850 running IP Services(CAT3K_CAA-UNIVERSALK9-M), Version 03.03.05SE RELEASE SOFTWARE (fc1)3850#sh sdm prefer Showing SDM Template InfoThis is the Advanced (high scale) template. I have a 6mbit circuit on a 100 meg port. (Gi1/0/1 on the left in the...
Good afternoon, I have been toying with two different designs that will hit production shortly.This is a single cloud DMVPN, that will be used to backup a number of point-to-point links. (private leased lines, a few different types, but irrelevant in...
sorry to Hijack, however I want to ask about DHCPCan the builtin WLC DHCP server send option 43 to the AP's on the management interface?Cant find anywhere to add this. So it is on the 3750 for now.OR does it send it automatically if DHCP is enabled ...
Worked fine on the Test 3850...The one in production runs auto Qos - and as these switches only have one ASIC across the fixed interfaces, I believe the class structures must match. As in you can only have one class structure, as this structure gets...
I would watch the videos on you tube on this, I think there are loads.Out in the field it is only when you walk into a comms room that hasn't been touched in 10 - 15 years, that any of this actually matters (and see a heap of late 90's devices on hub...
This for your CCNA? collision domains are physical, single ports on a switch, all hosts on a hub etc broadcast domains are logical, and span as far as the vlan goes. this includes access ports and trunk ports. (if the vlan is allowed on the trunk)
