Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just purchased the Cisco AIR-CB21AG-A-K9 for my laptop and for some reason when I try to install either the old driver or new driver it completely locks up. When I install the software with the card in (Before any driver is present) it does fine unti...
Have a client who we are going to be setting up a site to site VPN. The remote site is behind another PIX firewall which has private IP's on the inside. Beside the static nat, which ports need to be open in order to do a site to site?
Situation is we started trying to configure a 6009 for TACACS authentication yesterday. While we were adding the configuration lines in it stopped letting us add them. It would say Command Unauthorized. Couldn't do anything else at all, and finally l...
We have finally resolved the issue of users login times taking about 6-7 minutes across the site to site VPN by adding the following registry entry to each client:[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters]"MaxPacket...
Lets say site "A" is the main site. Site "B" is the remote. Site A is simply a PIX connected to a router with a T1. So no problems there. Site "B" Has a T1 to a router, with a PIX(Lets Call "PIX-A"" behind the router. We are placing another lets call...
Thanks for everyones input, talked with Cisco TAC as well and they agree that a password recovery is our only option. We will have to schedule a time to bring the switch down. Thanks again for your replies.
We are running into this exact problem for a customer. I am able to connect just fine from anywhere except DSL lines(Which is of course where we need it to connect from.) I am not very familar with DSL, but is there a device that we could use besides...
