Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to upgrade a primary and secondary instance running on VM's of Cisco ACS 5.7 to 5.8.I see steps in the guides that tell me to upgrade the log collector and define remote log target etc.Then in the same guide, it shows that I can use the applic...
Hi
I have a WLC8540 running 8.1 and have one SSID and i am running Flex Connect. Cisco TAC told me that the code will allow multiple VLANS to be mapped to the same SSID but when i add a new vlan to the same SSID in the Flex Connect AP Group WLAN ma...
Hi Emily,
Yes I was successful in getting this deployed and it is currently in production and working without any issues since day 1 of deployment. It has been in place for about 11 months now.
frist:
I created the vlans in a flex connect vlan temp...
hey guys, I am running a WLC8540 WITH 8.1 code, was there ever a solution found to do this. multiple vlans for one SSID on colo based controllers and cisco ap's running in flex connect mode. also I am using Microsoft nps sending attributes of each ...
Thank you for this information. Will this work for a Controller that runs only FlexConnect AP Groups. I have 54 Sites that connect to this controller which i believe means that the Interface Group would have to include over 35 Vlans as they are not...
