Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi
I have a WLC8540 running 8.1 and have one SSID and i am running Flex Connect. Cisco TAC told me that the code will allow multiple VLANS to be mapped to the same SSID but when i add a new vlan to the same SSID in the Flex Connect AP Group WLAN ma...
Hi Emily,
Yes I was successful in getting this deployed and it is currently in production and working without any issues since day 1 of deployment. It has been in place for about 11 months now.
frist:
I created the vlans in a flex connect vlan temp...
hey guys, I am running a WLC8540 WITH 8.1 code, was there ever a solution found to do this. multiple vlans for one SSID on colo based controllers and cisco ap's running in flex connect mode. also I am using Microsoft nps sending attributes of each ...
Thank you for this information. Will this work for a Controller that runs only FlexConnect AP Groups. I have 54 Sites that connect to this controller which i believe means that the Interface Group would have to include over 35 Vlans as they are not...
