Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I've found numerous sources for changing the background image on a 7912 to something else.I am looking for a way to change it back to the Cisco logo. How does one REMOVE a backgroundimage going back to default? I've tried factory reset with no luc...
By setting up sip, it seems that it lets anything that connects to it (registered or not, validuser or not) make calls to any dial-peer. How do I go about making it so the sip endpointcan only make a call is if it that sip endpoint registered with cu...
Is it possible to do some sort of selective outbound dialing based on ephone?Say for local calling.If ephone 1 dials 5551212, it gets changed to 4085551212and if ephone 2 dials 5551212, it gets changed to 6505551212?
I am running CUCME 4.1.I have voicemail running on an asterisk box (through mwi-server in sip-ua).I have added a SIP phone to CUCME, with the following below.When the client is connected to CUCME, it sends the call to voicemail withno problem.. When ...
Would it be possible to have a Cisco router running ios act as a vpn client?I'd like it to connect to a remote vpn server, receive an ip address using pptp,setup some kind of nat and do selective routing, say only addresses in thesubnet 24.0.0.0/8 an...
On the 7970, under Security Configuration it states both MIC and LSC are installed,under Trust List, has the CTL file, ITL File not installed. Here is the debug output:thor(config-ephone)#restrestarting 0024.C4FE.1617thor(config-ephone)#Apr 29 09:08:...
Hi, I'm hoping the author of this is still around.I had a go at running your script and it seems the only phone to work with this is my 7921. I also have a 7912, 7941 and a 7970 of which I get the following output from debug ephone reg:Apr 27 04:34:4...
Hi John,Thanks for the suggestion. I fiddled around a little with COR earlier, only placing one on the voicemailextension and seeing what happened. From my observation, it looks like COR only works when it isapplied to a phone/dn. When there is no CO...
I'm not authenticating against mac. Not doing anything with tftp. I put in the user: 100, password: random,there is no voice register pool for '100'. This is me, using x-lite as 100 to call voicemail at 1571 in ccsip debug:Also, X-Lite is set to not ...
