Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a few of these, brand new, just attached them to the network using AIR-PWRINJ3's. The radios are disabled with the following error: "CDP_PD-2-POWER_LOW: All radios disabled. LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED"This is the right power inje...
I want to remotely push and store a AP1231 IOS image to some local 2950's. Then use the 2950's as tftp servers so I can upgrade Access Points using local bandwidth. Is this possible?
My ISP has a weird security model and is suggesting that I change my BGP outbound port from 179 to something else. Anyone know how to change the default BGP port on a Cisco 3725 router.
I have a valid CCO account (can post on the Forums without one), but cannot download the current 1240 IOS software. It just blankly sends me back to the IOS page. Frustrating.
Yeah I saw that article too. I tried the command, reloaded and they are still in reset.I might try disabling CDP to see if that lites up the radio. Or it could just be bad Power Injectors.
