About Giovanni Alai

Giovanni Alai · 01-30-2015

Hi,reading this page: http://www.cisco.com/c/en/us/products/collateral/switches/small-business-smart-switches/data_sheet_c78-610061.html ; I noticed that there is written that the MGBSX1 maximum distance on SG300 or SF300 Series is 300 meters.On the ...

Giovanni Alai · 07-31-2014

Hi,I have upgraded the firmware of a SF300-24 to the version 1.3.7.18. After the upgrade i noticed that via Telnet the command menu doesn't work: the swithc says "Unrecognized commad".Before upgrading it the command menu worked fine ( i attach a pict...

Giovanni Alai · 08-03-2014

Hi Christopher,thank you for the answer.Regards,Giovanni Alai

Giovanni Alai · 08-01-2014

Hi,yes the dograde could be a solution, but if in the future we need to upgrade the firmware to solve some bugs we will lost the feature...Thank you.

Giovanni Alai · 08-01-2014

Hi,so do you think that in the future this feature will be not available? We used this because sometimes we use it insted the WEB GUI..

Giovanni Alai · 07-31-2014

Hi Moorthy,i did these step, and the switch is working with the version 1.3.7.18.The problem is that using the version 1.3.7.18, via Telnet the Command menu doesn't work. Thank you.

Giovanni Alai · 07-31-2014

Hi Moorthy,i did these step, and the switch is working with the version 1.3.7.18.The problem is that using the version 1.3.7.18, via Telnet the Command menu doesn't work. Thank you.

Member Since	‎02-20-2013 02:43 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	9

User Statistics

User Activity

MGBSX1 and maximum distance on CISCO SG300-10SFP-K9-EU

Command menu via Telnet doesn't work on SF300-24 with Firmware 1.3.7.18

Hi Christopher,thank you for

Hi,yes the dograde could be a

Hi,so do you think that in

Hi Moorthy,i did these step,

Hi Moorthy,i did these step,