Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Does FWSM v 2.3.1 support Stub Multicast Routing Feature ?I've found this FAQ which explain that this feature is supported : http://www.cisco.com/warp/public/707/fwsm-faq.htmlBut I didn't find any documentation how to configure it on a FWSM.I trie...
We are running a cluster made of 2 CCM 3.3.4.Our Gatewayq (Cisco 1760) with 1 E1, are configured in MGCP.When FE port is disconnected from Network, isdn L2 stays in MULTIFRAME_ESTABLISHED.Result is that incoming calls from PSTN are sent to this Gatew...
Hi,We are running a 2 CCM 3.3.x Cluster.On Subscriber, CDR Insert process is running.Regularly, an error appears in Event viewer even if CDR UNCPATH is configured with this value : \\PUB\CDR.What do we need to change in our configuration appart from ...
Hi,We are running CCME 3.2 on 2801 with 12.3.11T2 IOS version.We configured CCME for all IP Phones to be in French with the following commands.telephony user-locale FR network-locale FRIP Phones stay in English.What do we need to change ?Regards,Fabi...
Hi,We are running CCM 4.1.2, with 2610XM, running 122-15.T7.bin, VWIC-1MFT-E1, AIM-VOICE.We configured 2 route-group, 1 Route-list and Route-pattern.When H323 Gw is down, CCM tries to go to the next RG in my RL, after the H225 TCP Timer.When Gateway ...
Issue is the same when all gateways are inserted in same RG. H323 Message retruned by Gateway when E1 is down doesn't permit CCM either to go through next GW or to next RG ?When Gateway is offline, redundancy is working fine, issue appears when E1 po...
Hi,I'm working with Philippe regarding this issue.We tried the following command :no dsp services dspfarm.Issue seems to be the same.Result of "show voice dsp" is empty (our voice and signalling group are empty).Result of "show voice dsp details" see...
