Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Gengad
Stats
Member since
08-11-2011
28
Posts
0
Helpful
0
Solutions
Certifications
06-10-2018
01:08 PM
I know this has been a while, could you please share if the Service Provider solved your issue, I have similar issue here on Call Forward All to ITSP. My problem is I can see session in progress 183 but not 180 Ringing, which the external phone doesn't ring but establishes the call. Please see my cube debug ccsip messages.
---------------------------------------------------------
INVITE sip:+41XXXXXXXX@10.4.8.102:5060;user=phone;nt_info=proxy SIP/2.0
Via: SIP/2.0/UDP 138.187.57.135:5060;branch=z9hG4bKmk8177007o4lvsp1bg00.1
From: <>;tag=17575036
To: "+41XXXXXXXX"<>
Call-ID: e639d9db367e1c9e85c44dcb480468c9d863e4@10.83.8.11
CSeq: 1 INVITE
Content-Type: application/sdp
Contact: <>
User-Agent: Nortel SESM 19.0.4.0
Accept: application/sdp
Expires: 330
Max-Forwards: 26
Supported: com.nortelnetworks.firewall,p-3rdpartycontrol,nosec,join,x-nortel-sipvc,gin,100rel,timer,histinfo,replaces
Allow: INVITE,ACK,BYE,CANCEL,INFO,PRACK,REFER,SUBSCRIBE,NOTIFY,UPDATE
History-Info: <>;index=1, ;index=1.1;rc=1
Min-SE: 1800
P-Early-Media: supported
Content-Length: 308
v=0
o=genband 325373952 1527894611 IN IP4 138.187.57.135
s=-
e=unknown@invalid.net
c=IN IP4 138.187.57.135
t=0 0
m=audio 52146 RTP/AVP 8 0 13 101
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:13 CN/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=silenceSupp:on - - - -
a=ptime:20
000127: *Jun 1 23:38:13.691: //4475/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:760431@10.4.14.31 SIP/2.0
Via: SIP/2.0/TCP 10.4.14.101:5060;branch=z9hG4bKE7B1124
Remote-Party-ID: <>;party=calling;screen=no;privacy=off
From: <>;tag=477A63-C9C
To: <760431>
Date: Fri, 01 Jun 2018 23:38:13 GMT
Call-ID: AF7B67BB-652B11E8-91EDC36A-6B4AB0B8@10.4.14.101
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 2944050389-1697321448-2447885162-1800057016
User-Agent: Cisco-SIPGateway/IOS-15.5.3.S6
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1527896293
Contact: <>
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 25
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 266
v=0
o=CiscoSystemsSIP-GW-UserAgent 1320 9471 IN IP4 10.4.14.101
s=SIP Call
c=IN IP4 10.4.14.101
t=0 0
m=audio 8108 RTP/AVP 18 101
c=IN IP4 10.4.14.101
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
000128: *Jun 1 23:38:13.692: //4474/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 138.187.57.135:5060;branch=z9hG4bKmk8177007o4lvsp1bg00.1
From: <>;tag=17575036
To: "++41XXXXXXXX"<>
Date: Fri, 01 Jun 2018 23:38:13 GMT
Call-ID: e639d9db367e1c9e85c44dcb480468c9d863e4@10.83.8.11
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.5.3.S6
Content-Length: 0
000129: *Jun 1 23:38:13.694: //4475/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 100 Trying
Via: SIP/2.0/TCP 10.4.14.101:5060;branch=z9hG4bKE7B1124
From: <>;tag=477A63-C9C
To: <760431>
Date: Fri, 01 Jun 2018 23:10:23 GMT
Call-ID: AF7B67BB-652B11E8-91EDC36A-6B4AB0B8@10.4.14.101
CSeq: 101 INVITE
Allow-Events: presence
Content-Length: 0
000130: *Jun 1 23:38:15.054: //4475/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 183 Session Progress
Via: SIP/2.0/TCP 10.4.14.101:5060;branch=z9hG4bKE7B1124
From: <>;tag=477A63-C9C
To: <760431>;tag=17677943~a8fef022-c048-e716-a771-62758d9314fe-25368953
Date: Fri, 01 Jun 2018 23:10:23 GMT
Call-ID: AF7B67BB-652B11E8-91EDC36A-6B4AB0B8@10.4.14.101
CSeq: 101 INVITE
Require: 100rel
RSeq: 425484670
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
Allow-Events: presence
Server: Cisco-CUCM10.5
Call-Info: ;x-cisco-video-traffic-class=MIXED
Supported: X-cisco-srtp-fallback
Supported: Geolocation
P-Asserted-Identity: <>
Remote-Party-ID: <>;party=called;screen=no;privacy=off
Contact: <760431>
Content-Type: application/sdp
Content-Length: 257
v=0
o=CiscoSystemsCCM-SIP 17677943 1 IN IP4 10.4.14.31
s=SIP Call
c=IN IP4 10.0.255.38
b=TIAS:8000
b=AS:8
t=0 0
m=audio 15850 RTP/AVP 18 101
a=ptime:20
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
000131: *Jun 1 23:38:15.056: //4475/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Sent:
PRACK sip:760431@10.4.14.31:5060;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.4.14.101:5060;branch=z9hG4bKE7C1487
From: <>;tag=477A63-C9C
To: <760431>;tag=17677943~a8fef022-c048-e716-a771-62758d9314fe-25368953
Date: Fri, 01 Jun 2018 23:38:13 GMT
Call-ID: AF7B67BB-652B11E8-91EDC36A-6B4AB0B8@10.4.14.101
CSeq: 102 PRACK
RAck: 425484670 101 INVITE
Allow-Events: telephone-event
Max-Forwards: 70
Content-Length: 0
000132: *Jun 1 23:38:15.058: //4474/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 183 Session Progress
Via: SIP/2.0/UDP 138.187.57.135:5060;branch=z9hG4bKmk8177007o4lvsp1bg00.1
From: <>;tag=17575036
To: "++41XXXXXXXX<>;tag=477FB9-18DC
Date: Fri, 01 Jun 2018 23:38:13 GMT
Call-ID: e639d9db367e1c9e85c44dcb480468c9d863e4@10.83.8.11
CSeq: 1 INVITE
Require: 100rel
RSeq: 1610
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Remote-Party-ID: <>;party=called;screen=no;privacy=off
Contact: <>
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.5.3.S6
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 238
v=0
o=CiscoSystemsSIP-GW-UserAgent 7139 78 IN IP4 10.4.8.102
s=SIP Call
c=IN IP4 10.4.8.102
t=0 0
m=audio 8106 RTP/AVP 8 101
c=IN IP4 10.4.8.102
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
000133: *Jun 1 23:38:15.073: //4475/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.4.14.101:5060;branch=z9hG4bKE7C1487
From: <>;tag=477A63-C9C
To: <760431>;tag=17677943~a8fef022-c048-e716-a771-62758d9314fe-25368953
Date: Fri, 01 Jun 2018 23:10:24 GMT
Call-ID: AF7B67BB-652B11E8-91EDC36A-6B4AB0B8@10.4.14.101
Server: Cisco-CUCM10.5
CSeq: 102 PRACK
Content-Length: 0
000134: *Jun 1 23:38:15.073: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
PRACK sip:++41XXXXXXXX@10.4.8.102:5060 SIP/2.0
Via: SIP/2.0/UDP 138.187.57.135:5060;branch=z9hG4bKomg8os20dg03aqj3arh0.1
From: <>;tag=17575036
To: "++41XXXXXXXX"<>;tag=477FB9-18DC
Call-ID: e639d9db367e1c9e85c44dcb480468c9d863e4@10.83.8.11
CSeq: 2 PRACK
User-Agent: Nortel SESM 19.0.4.0
Max-Forwards: 67
Supported: com.nortelnetworks.firewall,p-3rdpartycontrol,nosec,join,x-nortel-sipvc,gin
RAck: 1610 1 INVITE
Content-Length: 0
000135: *Jun 1 23:38:15.074: //4474/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 138.187.57.135:5060;branch=z9hG4bKomg8os20dg03aqj3arh0.1
From: <>;tag=17575036
To: "++41XXXXXXXX"<>;tag=477FB9-18DC
Date: Fri, 01 Jun 2018 23:38:15 GMT
Call-ID: e639d9db367e1c9e85c44dcb480468c9d863e4@10.83.8.11
Server: Cisco-SIPGateway/IOS-15.5.3.S6
CSeq: 2 PRACK
Content-Length: 0
000136: *Jun 1 23:38:15.075: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
UPDATE sip:+97XXXXXXXX@10.4.14.101:5060;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.4.14.31:5060;branch=z9hG4bK1d0c8721c2d6
From: <760431>;tag=17677943~a8fef022-c048-e716-a771-62758d9314fe-25368953
To: <>;tag=477A63-C9C
Date: Fri, 01 Jun 2018 23:10:24 GMT
Call-ID: AF7B67BB-652B11E8-91EDC36A-6B4AB0B8@10.4.14.101
User-Agent: Cisco-CUCM10.5
Max-Forwards: 70
Supported: timer,resource-priority,replaces
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 UPDATE
Call-Info: ;x-cisco-video-traffic-class=MIXED
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Session-Expires: 1800;refresher=uac
Min-SE: 1800
P-Asserted-Identity: <>
Remote-Party-ID: <>;party=calling;screen=no;privacy=off
Contact: <>;+multiple-codecs-in-ans
Content-Length: 0
000137: *Jun 1 23:38:15.076: //4475/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.4.14.31:5060;branch=z9hG4bK1d0c8721c2d6
From: <760431>;tag=17677943~a8fef022-c048-e716-a771-62758d9314fe-25368953
To: <>;tag=477A63-C9C
Date: Fri, 01 Jun 2018 23:38:15 GMT
Call-ID: AF7B67BB-652B11E8-91EDC36A-6B4AB0B8@10.4.14.101
Server: Cisco-SIPGateway/IOS-15.5.3.S6
CSeq: 101 UPDATE
Allow-Events: telephone-event
Contact: <>
Content-Length: 0
Remote-Party-ID: <>;party=called;screen=no;privacy=off
000138: *Jun 1 23:38:19.985: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
CANCEL sip:++41XXXXXXXX@10.4.8.102:5060;user=phone;nt_info=proxy SIP/2.0
Via: SIP/2.0/UDP 138.187.57.135:5060;branch=z9hG4bKmk8177007o4lvsp1bg00.1
CSeq: 1 CANCEL
From: <>;tag=17575036
To: "++41XXXXXXXX"<>
Call-ID: e639d9db367e1c9e85c44dcb480468c9d863e4@10.83.8.11
Max-Forwards: 26
Content-Length: 0
Reason: Q.850;cause=31;text="Normal, unspecified"
000139: *Jun 1 23:38:19.987: //4474/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 138.187.57.135:5060;branch=z9hG4bKmk8177007o4lvsp1bg00.1
From: <>;tag=17575036
To: "++41XXXXXXXX"<>
Date: Fri, 01 Jun 2018 23:38:19 GMT
Call-ID: e639d9db367e1c9e85c44dcb480468c9d863e4@10.83.8.11
CSeq: 1 CANCEL
Content-Length: 0
000140: *Jun 1 23:38:19.988: //4475/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Sent:
CANCEL sip:760431@10.4.14.31 SIP/2.0
Via: SIP/2.0/TCP 10.4.14.101:5060;branch=z9hG4bKE7B1124
From: <>;tag=477A63-C9C
To: <760431>
Date: Fri, 01 Jun 2018 23:38:15 GMT
Call-ID: AF7B67BB-652B11E8-91EDC36A-6B4AB0B8@10.4.14.101
CSeq: 101 CANCEL
Timestamp: 1527896299
Reason: Q.850;cause=31;text="Normal, unspecified"
Max-Forwards: 26
Content-Length: 0
000141: *Jun 1 23:38:19.988: //4474/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 487 Request Cancelled
Via: SIP/2.0/UDP 138.187.57.135:5060;branch=z9hG4bKmk8177007o4lvsp1bg00.1
From: <>;tag=17575036
To: "++41XXXXXXXX"<>;tag=477FB9-18DC
Date: Fri, 01 Jun 2018 23:38:19 GMT
Call-ID: e639d9db367e1c9e85c44dcb480468c9d863e4@10.83.8.11
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.5.3.S6
Reason: Q.850;cause=16
Content-Length: 0
000142: *Jun 1 23:38:19.992: //4475/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.4.14.101:5060;branch=z9hG4bKE7B1124
From: <>;tag=477A63-C9C
To: <760431>
Date: Fri, 01 Jun 2018 23:10:29 GMT
Call-ID: AF7B67BB-652B11E8-91EDC36A-6B4AB0B8@10.4.14.101
Server: Cisco-CUCM10.5
CSeq: 101 CANCEL
Content-Length: 0
000143: *Jun 1 23:38:19.993: //4475/AF7AA4D591E7/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 487 Request Cancelled
Via: SIP/2.0/TCP 10.4.14.101:5060;branch=z9hG4bKE7B1124
From: <>;tag=477A63-C9C
To: <760431>;tag=17677943~a8fef022-c048-e716-a771-62758d9314fe-25368953
Date: Fri, 01 Jun 2018 23:10:29 GMT
Call-ID: AF7B67BB-652B11E8-91EDC36A-6B4AB0B8@10.4.14.101
CSeq: 101 INVITE
Allow-Events: presence
Reason: Q.850;cause=31
Server: Cisco-CUCM10.5
Content-Length: 0
000144: *Jun 1 23:38:19.994: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:++41XXXXXXXX@10.4.8.102:5060;user=phone;nt_info=proxy SIP/2.0
Via: SIP/2.0/UDP 138.187.57.135:5060;branch=z9hG4bKmk8177007o4lvsp1bg00.1
CSeq: 1 ACK
From: <>;tag=17575036
To: "++41XXXXXXXX"<>;tag=477FB9-18DC
Call-ID: e639d9db367e1c9e85c44dcb480468c9d863e4@10.83.8.11
Max-Forwards: 26
Content-Length: 0
000145: *Jun 1 23:38:19.996: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:760431@10.4.14.31 SIP/2.0
Via: SIP/2.0/TCP 10.4.14.101:5060;branch=z9hG4bKE7B1124
From: <>;tag=477A63-C9C
To: <760431>;tag=17677943~a8fef022-c048-e716-a771-62758d9314fe-25368953
Date: Fri, 01 Jun 2018 23:38:15 GMT
Call-ID: AF7B67BB-652B11E8-91EDC36A-6B4AB0B8@10.4.14.101
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
... View more
06-08-2018
01:34 PM
Hello Rebort,
I am also facing issue calling certain 3rd party phones, Can you please confirm if this is command what is causing the problem "midcall-signaling passthru"? Like some of my call forward number do work and some don't. Look at the debug below;
INVITE sip:+415XXXXXXXX@10.4.8.102:5060;user=phone;nt_info=proxy SIP/2.0 Via: SIP/2.0/UDP 138.187.57.135:5060;branch=z9hG4bKmk8177007o4lvsp1bg00.1 From: <sip:+97XXXXXXXXXX@138.187.57.135;user=phone>;tag=17575036 To: "+ 415XXXXXXXX "<sip:+415XXXXXXX@10.4.8.102:5060;user=phone;nt_info=proxy> Call-ID: e639d9db367e1c9e85c44dcb480468c9d863e4@10.83.8.11 CSeq: 1 INVITE Content-Type: application/sdp Contact: <sip:+97XXXXXXXXX@138.187.57.135:5060;nt_end_pt=YM0+~KW9k1E5w4Q3QQn~F1.rCJ7ztae9~KIi60~EuNSr~PhpEXk~P63rfeHde.584~M.q~Nv2scid~Nzio62GQi91-0400zfo6~S4AJ;nt_server_host=10.83.8.8:5060;transport=udp> User-Agent: Nortel SESM 19.0.4.0 Accept: application/sdp Expires: 330 Max-Forwards: 26 Supported: com.nortelnetworks.firewall,p-3rdpartycontrol,nosec,join,x-nortel-sipvc,gin,100rel,timer,histinfo,replaces Allow: INVITE,ACK,BYE,CANCEL,INFO,PRACK,REFER,SUBSCRIBE,NOTIFY,UPDATE History-Info: <sip:+415XXXXXXXX@pstn.in:5060;user=phone;nt_info=proxy;sid=769380>;index=1,<sip:a_671511@10.83.8.25:5060;transport=udp;physicalsite=Site2;linkname=csbc2>;index=1.1;rc=1 Min-SE: 1800 P-Early-Media: supported Content-Length: 308
v=0 o=genband 325373952 1527894611 IN IP4 138.187.57.135 s=- e=unknown@invalid.net c=IN IP4 138.187.57.135 t=0 0 m=audio 52146 RTP/AVP 8 0 13 101 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:13 CN/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=silenceSupp:on - - - - a=ptime:20
I have no vad turned on on my dial peer or anywhere else.
Please do let me know if " no update-callerid" solves this problem?
... View more
Created by
Gengad
in IP Telephony and Phones
in IP Telephony and Phones
06-07-2018
09:27 AM
06-07-2018
09:27 AM
Hi Sjones,
I have similar problem,
We have 2 clusters when someone calls from Cluster A to Cluster B Call Forward All to Mobile, the call shows up the main corporate number rather than showing the original caller number or the IP Phone number. I saw how you solved your number, can you please confirm if your command is correct?
request INVITE sip-header Diversion modify "<>" "sip: @>"
"<>" what do I need to put there or do I leave it empty same for "sip: @>"
Your help will be appreciated.
... View more
Created by
Gengad
in IP Telephony and Phones
in IP Telephony and Phones
11-13-2017
12:54 PM
11-13-2017
12:54 PM
Hi Chris,
I hope you well and in the best of health,
I just thought to drop this message and thank you for your quick and easy solution,
This has really solved my problem!!!
Gengad
... View more
04-26-2016
03:12 AM
Hi Phillip,
I hope you doing well,
Just to update you from our last conversation we had. I have uploaded the certificate on our lab before we take it to the production.
Results;
>>I have truned ITL to TRUE from Enterprise Parameter >> Save & Apply >> Reset
>>Uploaded new certificate and it went fine with no issues
>>I used CTL eToken to validate my certificate that also came back with pass
Cisco says in their documents that I need to restart TFTP and then reload ALL CUCM nodes if I am using CTL eToken. What are they talking about here!! If I reload the CUCM it means TFTP, CTL Provider, TV, Tomcat and the rest will restart by doing this way.
Cisco Doc
The recommended procedure is to restart all TFTP servers, followed by all servers running the CallManager process. Restarting the TFTP servers allows the TFTP process to load in the newly generated CTLFile.tlv. Restarting the nodes running CallManager causes the phones to reset and download the new CTL file from the configured TFTP server. admin:utils system restart
Do you really want to restart ? Enter (yes/no)?
I did follow it as it says in their document, but however once the CUCM came back , on the screen of the phone it says Registering, without full registered.
If you soft reset the phones do pickup the new CTL/CAPF files. Remember I am dealing with 5000 phones on the customer site and of course this is not possible to do soft rest on all 5000 phones.
Can you please advise me if I am doing something wrong here?
I hope to hear from you soon;
... View more
04-06-2016
12:35 AM
Hi Jaime,
Long time we haven't spoken, Thanks for guiding us in the right direction. Your help has been noticed across Cisco Support. Whatever you give I can assure you that you will get it back from somewhere.
First point you made was that I need to get 2 phones downloaded with the correct firmware. This is DONE
CDP is enabled in on the phone. My next question is do we need it also on the switch level? The phones are on the same subnet.
I have rebooted the phones and nothing happen. My next question is on the phone you have an option where is says load server: Do I put the IP address of the phone where the firmware resides? Or do I leave it blank? If yes then which IP address do I need to provide out of the 2 phone which has the latest firmware?
On the Device >>>> Device Setting >>>> Device Default , on the inactive load do I put the latest firmware as inactive?
I also turned off TFTP Server to see if the phone actually downloading the firmware from the phone not the TFTP.
Can you please very kindly assist me and tell me where I am going wrong with this. Currently I am testing this process in the LAB before we do it in production.
I look forward to hear from you soon.
Many Thanks
... View more
04-04-2016
05:57 AM
Hi Jon,
I hope you well,
I know it has been a long time since you did this experiment. I would appreciate if you could help me here.
I am upgrading remote phones a cross Europe, BW is a major issue with me at the moment. I want to use PSF. I got my phones connect to VPN concentrator going through ASA Firewall.
I did the following;
1. Enabled PSF and checked the box "Override Common Settings".
2. Enabled PSF for one phone which participates to download from step 1. I also checked "Override Common Settings".
3. I downloaded a new firmware on my phone from tftp.
4. My expectation was that step 2 phone will automatically download the firmware. That didn't happen.
Can you please very kindly advice me where I am going wrong. I also asked Security team to unblock port 051 CPPDP.
Thanks
... View more
04-03-2016
10:06 AM
Hi Phillip,
Thanks for taking the time and sharing your knowledge with me. This has really helped me now.
To break it down and to illustrate that I have understood you fully.
CallManager, Tomcat, IPSec, TVS and CAPF.pem All are identity certificate. These all certficates needs to be uploaded in all CUCM nodes Pub first and then Sub 1-3.
CallManager-Trust (root) is uploaded in CUCM Pub first then Sub 1-3 as Trust from cisco dialog box. This also includes Tomcat-trust, TVS-trust, IPSec-trust and CAPF-trust. Upload them on all nodes in the order you've mentioned.
Intermediate CallManager, Tomcat, IPSec, CAPF and TVS certificate all will be uploaded as Trust; only upload if (CA) has provided a signed certificate with multiple certificates in the certificate chain. DO I NEED TO UPLOAD THEM IN ALL NODES? Pub >>>> Sub1 >>>> Sub2,3.
Where does the application certificate fit then?
On Cisco Web is say >>>> you must obtain both the signed application certificate and the CA root certificate from the CA.
Last question does the procedure apply to CUC, UCCX, IMP.
Thanks for taking time to read this.
... View more
03-30-2016
12:28 PM
Hi Phillip,
Can you please break it down since I am not an expert in Certificates. When you say Identity cert how does it look like? Intermediate and Root Cert as well? There are many cert on my CUCM server, can you give me an example on each one of them. As far I know Cisco says I need to worry about are the following;
Tomcat.pem CAPF.pem CallManager.pem IPSec.pm and TVS.pem
Add them as trusted.
LSC CAPF will be signed by third-party Microsoft CA and will be uploaded part of the above certificates CAPF.pem. I will be using IEEE802.1X as method of Authentication through Cisco ISE. Also please remember we are currently using CUCM, CUC, UXXC, and IMP version 9.1X. Signed certificate will it be the same upload as CUC, UCCX and IMP.
IMP >>> CUP.pem IPSec.pem, Tomcat.pem I generated CSR for each one of them
CUC >>> Tomcat.pem IPSec.pem generated CSR for each one of them
UCCX >> Tomcat.pem IPSec.pem generated CSR for each one of them and will be giving them all to CA to sign it.
When you say do it server by server you mean the following
Pub-Upload
Tomcat.pem tomcat-trusted CAPF.pem capf-trusted CallManager.pem CallManager-trusted IPSec.pm ipsec-trusted and TVS.pem tvs-trusted
3X Sub-Upload
Tomcat.pem tomcat-trusted CAPF.pem capf-trusted CallManager.pem CallManager-trusted IPSec.pm ipsec-trusted and TVS.pem tvs-trusted
Please correct me if I am going the wrong direction.
You help and knowledge would be appreciated,
Thanks Phillip
... View more
03-29-2016
12:31 PM
Hi Phillip,
Thanks for the quick respond "Much Appreciated"
In a nutshell,
If you upload Tomcat.pem CAPF.pem CallManager.pem IPSec.pm and TVS.pem in CUCM pub that will be propagated to the rest of Subscribers? Am right here? No need to upload Sub certificates in Sub CUCM. Remember every each CUCM server got unique certificates.
As for CAPF LSC this will be signed locally using Microsoft windows. So the only way to upload is by CLI?
Last one my customer wants SHA2 and as you know SHA1 is only supported in ver 9.1.x, where SHA2 is supported in 10.5. What advice are you giving me in terms of upgrade. Do you think I should do the upgrade first then follow it up with certificate? Currently I am running 9.1.X
Please advice,
Many Thanks
... View more
03-29-2016
08:41 AM
Hi Jose,
Just a quick one did you find solution for version 10.5? If yes, can you please share it with us. Currently I am updating all our certificates. We are using CA LSC CAPF. Can you please advice if your outcome is any different?
Another question, When you upload the certificates to CUCM do you need to also upload it in subscriber or is it just Pub. Reason for this question is I downloaded 5 CSR certificates from each server.
Please Advice
Gengad
... View more
07-14-2015
04:14 AM
07-14-2015
04:01 AM
On CUCM go to system then scroll down all the way to "Region", take a screen shot on every each tap then post it here please.
... View more
07-14-2015
01:06 AM
Hi Sharma, Please answer me this question? Do you have a proper DDI number from your service provider? If yes, is your call coming all the way to your local gateway? please use "debug isdn q931"? is your call going to CUCM Hunt Pilot? I see you used 222 for hunt pilot, what is the full DDI number which you got it from the service provider? Have you striped some of your number on the gateway? gengads28
... View more
07-18-2014
04:46 PM
Will Phinny, I had this problem last year, and it gave me a lot of problems, but however with the help of Jaime I managed to solve it. Am glad that this helped you. Well Done ! Gengads28
... View more
05-20-2019
I found a way to do it, please follow these steps, also visit Cisco
Website for more
details.https:/...
06-10-2018
I know this has been a while, could you please share if the Service
Provider solved your issue, I ha...
06-08-2018
Hello Rebort, I am also facing issue calling certain 3rd party phones,
Can you please confirm if thi...
Created by
Gengad
in IP Telephony and Phones
06-07-2018
06-07-2018
Hi Sjones, I have similar problem, We have 2 clusters when someone calls
from Cluster A to Cluster B...
Created by
Gengad
in IP Telephony and Phones
11-13-2017
11-13-2017
Hi Chris, I hope you well and in the best of health, I just thought to
drop this message and thank y...
04-26-2016
Hi Phillip, I hope you doing well, Just to update you from our last
conversation we had. I have uplo...
04-06-2016
Hi Jaime, Long time we haven't spoken, Thanks for guiding us in the
right direction. Your help has b...
04-04-2016
Hi Jon, I hope you well, I know it has been a long time since you did
this experiment. I would appre...
04-03-2016
Hi Phillip, Thanks for taking the time and sharing your knowledge with
me. This has really helped me...
03-30-2016
Hi Phillip, Can you please break it down since I am not an expert in
Certificates. When you say Iden...
03-29-2016
Hi Phillip, Thanks for the quick respond "Much Appreciated" In a
nutshell, If you upload Tomcat.pem ...
03-29-2016
Hi Jose, Just a quick one did you find solution for version 10.5? If
yes, can you please share it wi...
07-14-2015
On CUCM go to system then scroll down all the way to "Region", take a
screen shot on every each tap ...
Public Statistics
| Date Registered | 08-11-2011 04:47 AM |
| Date Last Visited | 11-04-2019 05:47 AM |
| Total Messages Posted | 28 |
