Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have 2 x Cisco Nexus 9K 93180YC-EX units connected via vPC, plus a port-channel (also with vPC) back to our L3 Core (6509 VSS pair). We have a new ESX Host trying to boot via PXE to get a DHCP address but it fails each time getting a 'No offer...
Hi, I have 2 x Cisco Nexus 9K 93180YC-EX units connected via vPC, plus a port-channel (also with vPC) back to our L3 Core (6509 VSS pair). We have a new ESX Host trying to boot via PXE to get a DHCP address but it fails each time getting a 'No offer...
Hi,
Can anyone tell me if it is possible to recover the admin account password on a Cisco 2504 WLC? I've seen varying details on the subject but could really do with some clarification as to whether it is possible. The controller is live and has ...
Hi,
Can anyone tell me if it's possible to move maps between buildings in PI 3.4? I was convinced this was an available option but cannot seem to find it.
Cheers
Neil
Hi,
We have a client running 5 x 4404 WLC's managed via WCS V7.0.240.0. I know it's no longer supported and this system is due to be replaced in the next 6-8 months but we have a controller down and I need to replace it ASAP (I already have the hard...
Hi Paul, Thank you for your reply.Yes, the correct VLANs are configured on the uplink to the core and the interface serving the Server has the correct VLAN. The core is doing all the L3, we just have our mgmt SVI configured locally. We can ping bac...
That's great, thank you. I now have both old and new entries referencing both MAC's but this shouldn't be an issue hopefully. I'm now just waiting on AP's moving back to the original controller, which is taking some time considering their priority ...
Thanks for your response. I've managed to get the replacement controller online in WCS and to take a config but configuring the IP, SNMP & SSH details as the old one were. However, the big issue I'm now having is Mobility Groups.
Because the MAC ad...
