Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Everyone,
I am currently configuring the Solarwinds VOIP & Network Quality module, which requires all nodes to have the AXL service running.
Presently the publisher has this service enabled, but my 2 subscribers have this service deactivated.
Both...
Just over 12 months ago, we migrated all our telephony users onto a stable v9 call manager/uccx platform from various versions and so far has been running smoothly. Recently 2 of our smaller sites, who use call transfer on a regular basis started to ...
Hi All,I have a production L3 3750 stack with 2 WAN connections, which is connected to the companies WAN infrastructure using EIGRP.Recently there have been a number of hello drops from one site, which is causing the EIGRP adjacency to drop and so th...
Hi All,I've configured an IPSEC VPN between an ASA and PIX with the exact same configuration, and I can see phase 1/2 up.However from the PIX end I am able to telnet to the remote site to other network devices, but from the ASA end, I am unsuccessful...
Hi All,I've configured an IPSEC VPN between an ASA and PIX with the exact same configuration, and I can see phase 1/2 up.However from the PIX end I am able to telnet to the remote site to other network devices, but from the ASA end, I am unsuccessful...
Unfortunately the switch is remote, so this cannot be executed until the link has been re-established.What would be the answer if you could or not ping whilst it is being reset?
You can see from the log that the STUB is denying the hello packets, which is the ISP router....Mar 4 08:55:53.916 GMT: EIGRP: Holdtime expiredMar 4 08:55:53.916 GMT: %DUAL-5-NBRCHANGE: EIGRP-IPv4 1: Neighbor 10.200.0.60 (VlanXXX) is down: holding...
Can anyone help? I have a feeling that the application that is trying to complete the TCP handshake is sending the final FIN ACK packet on a different session. I know this happens with H323 ansd you use the fixup command on the ASA.Would a similar th...
