Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi ,We have users from our shanghai branch office behind a pix 515 using cisco ipsec vpn client version 5.0.07.0440 to connect to our US Office. At our office we have a cisco ASA 5545x . The users vpn client from our branch office disconnects frequ...
Hi, i have configured two catalyst 4500x in VSS and i need to reload the active switch, how can i reload the active switch without any downtime and make it active again once it comes back up.#sh switch virtual Executing the comma...
Hi,I am in the process of configuring a 4500x switch and need to restrict inter-vlan traffic. Please suggest an optimal way of accomplishing this task.vlan 3 - 10.101.3.x - Infrastructurevlan7 - 10.101.7.x - Productionvlan4 - 10.10...
Hi,i am installing a cisco 4500X switch and the power cord required is a c15 - c14 because of the pdu we are using.The one that has shipped from cisco is a different connector and cannot be used. i wanted to find out if CAB-C15-CBN...
Hi,We are in the process of installing the Nexus 5k and 2K switches and i had a question regarding airflow.The Nexus 2248TP is standard airflow - will the switch ports and server nic be aligned?We will be installing the Nexus 5k in...
Thanks John, for the response.In my case the DMZ servers are initiating the traffic to the production servers.for example 10.101.4.75 --->10.101.7.15 on port 80.Since the DMZ is on a firewall ,the access-list is stateful. But the production vlan is ...
Hi yes it is a c15 - c14, The C15 female connector has the same pin array as a C13. However the C15 has a notch at the base. The one that shipped from cisco is CAB-US515-C15-US.i wanted to make sure the specifications for CAB-C15-CBN - Cabinet Jumper...
How can i bridge the two interfaces on the router? , we want to avoid putting in a switch in between the router and firewall,Any configuration suggestions on the router will be helpful.i was looking through the backup interface configuration on the ...
Thanks Kureli,I will attend the webcast, but from my understanding for the above solution the default gateway for all the vlans has to be moved from the core switches to the ASA ?
Hi,Currently we have 35 vlans but this may increase and keeping future expansion in consideration, we want to move the default gateways to the Core Switches. This is the current design we are planning.Internet------>EdgeRouters------->ExtFirewall(NA...
