Hi, I am installing ACS 5.4 for WiFI user and using EAP-TLS/ certificate based authentication. I have Authorization profile created as shown in attachement. Under authorization profile i have selcted "Was Machine Authenticated=True"Condition. Somehow clients are not able to connect. When I looked at logs on ACS it shows that the requests are not matching this rule bu default rule. As soon as I disable this condition, user gets connected I have already selected "Enable Machine Authentication" under AD & "Process host Lookup" in allowed protocol. Any Suggesions? Regards, Shivaji ... View more

             Hello, I have recenly replaced my old 4500 switch with latest WS-C4507R+E (Sup7L-E). After replacing the switch I found that switch port does not come up when connected particular type of Xerox printer. I have tried all speed settings ( Auto as well as hardcoding the speed on switch as well as printer) but switch port remains down. When I connect this printer to any other old switch port turns up (with auto as well as hardcoded speed) This is happening with particual type of Xerox printers. Any idea what is causing this? ... View more

Hello , I have NM-16ESW card installed in one of my 3845 router. Below is the sh inventory output NAME: "16 Port 10BaseT/100BaseTX EtherSwitch", DESCR: "16 Port 10BaseT/100BaseTX EtherSwitch" PID: NM-16ESW          , VID: V01 , SN: FOC11482484 NAME: "Gigabit(1000BaseT) module for EtherSwitch NM", DESCR: "Gigabit(1000BaseT) module for EtherSwitch NM" PID: GE-DCARD-ESW      , VID: V01 , SN: FOC11454FW6 Is the Gig port available here can be used for uplink? I found following comment at http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet09186a00801aca3e.html "GE-DCARD-ESW: This optional 1000BaseT Gigabit Ethernet port for NM-16ESW and NMD-36-ESW can be used for a gigabit connection for a file server or for intra-chassis stacking of the Cisco EtherSwitch module. Stacking is supported in Cisco IOS release 12.2(11)T and beyond" When I connect one laptop on the Gig port on GE-DCARD-ESW and other laptop on on board gig port, I get 900mbps speed only in one direction (on board gig to gig on switch module) while in other direction I get only 100mbps. Any Idea? ... View more

                   hi I have recently upgraded ASA to 8.4 and found that ASDM is not working on it. I tried the latest ASDM version 7.1 still no luck. When I try to access ASA using IE...it just shows " Page can not be displayed " Following is the config which I have http server enable http 0.0.0.0 0.0.0.0 inside http 10.52.193.218 255.255.255.255 inside asdm image disk0:/asdm-711-52.bin asdm location 0.0.0.0 0.0.0.0 inside asdm history enable Is there anything else required in ASA 8.4 for ASDM to work? When I telnet to ASA interface with 443 port it works ... View more

                   Hi, I am having Cisco LMS 3.2 I want to give an access to some desktop administrators so that they can pull the report of User Tracking in campus manager. Is there any way so that I can restric users to campus manager only? ... View more