About KLAUS FRIEDEL

KLAUS FRIEDEL · 06-20-2011

hi,we have got a big problem with our NAM (WS-SVC-NAM-1) - it does not boot.We have got a second one and in an other chassis. I changed the chassis, and RAM and Flash from the other one. RAM and Flash are ok.We checked the disc (hardware) with an On...

KLAUS FRIEDEL · 05-08-2012

Hi Kiran,a cisco link where you find some config examples:http://www.cisco.com/en/US/customer/products/sw/secursw/ps2086/prod_configuration_examples_list.htmlregards

KLAUS FRIEDEL · 05-02-2012

hi Todd,We tested a lot. It didn't work with XP but it works well with WIN7.We see the problem in client settings:you can choose "machine authentication", "user authentication" or "user or machine authentication"If you choose "machine authentication"...

KLAUS FRIEDEL · 04-20-2012

Hi Todd,It still doesn't work. Please let's analyse step by step:For Identity: single result selection "Identitiy Source": AD1For Authorization : Rule 1: Condition #1 System:UserName: Starts with : host/ ... ...

KLAUS FRIEDEL · 04-19-2012

Hi,I configured (ACS5.1) like the second Solution above:AD groups are selected, "enable machine authentication" is OK, Protocols allowed: PEAP; Process Host LookupAccess Policy: Identity --> AD1 Authorization--> like above ...

KLAUS FRIEDEL · 09-27-2011

hi,normaly you have to configure follow:switchport port-securityswitchport port-security mac-address sticky(switchport port-security violation shutdown - that is the default)The switchport learns the MAC and insert a line in the config e.g.:switchpor...

Member Since	‎02-14-2011 04:54 AM
Date Last Visited	‎07-08-2020 08:41 PM
Posts	21
Total Helpful Votes Received	3

User Statistics

User Activity

NAM does not boot (Module Failed SCP dnld)

Recommend a good reference book and helpful links to configure A

Re: Tips to make Machine Authentication Work - PEAP Authentication

Re: Tips to make Machine Authentication Work - PEAP Authentication

Re: Tips to make Machine Authentication Work - PEAP Authentication

single mac security