Hi All, i was working on NSO and i noticed that it doesn't get any data regarding platform even if i try to sync-from it give me no entries: admin@ncs# show devices device platformSERIALNAME NAME VERSION MODEL NUMBER--------------------------------...
hi all, i need some advice in configuring vpls, i've the following scenario: ME3600X = ASR9K = ME3600X PE P/PE PE with following config: ASR9K: !interface Bundle-Ether100 mtu 9026 ipv4 address 10.10.30.1 255.255.255.252!inte...
hi guys, i'd to know if there is a real limitation in the number of lines that can be written in dAcl, in official documentation i couldn't find any info about that
is a way to block only the telnet traffic over opened ports? ex. a server mail with tcp 25 and tcp 110 opened port u can telnet 'em , don't want let this but i want to permit other mail traffic is it possible via PIX Firewall ?(i've a 515 release 6....
Hi Michael, tnx for answer.Actually im on nso 5.1 with ned version :cisco-ios-cli-3.8/cisco-iosxr-cli-3.5/those who come with the installer.binit does the same issue even with ios-xr or nx-osreally don't understand why....admin@ncs# show devices devi...
Hi Michael, tnx for answer.Actually im on nso 5.1 with ned version :cisco-ios-cli-3.8/cisco-iosxr-cli-3.5/those who come with the installer.binit does the same issue even with ios-xr or nx-osreally don't understand why....admin@ncs# show devices devi...
hi yfherzog,
What if i want to do the same with ios xr?
Can i do a conditional code in the same service?
If so how can i access device type? (ios xr/xe - legacy ios?)Is there any doc/pdf or cheatsheet about object properties and method (such ncs:...
got it, problem was that me3600x wants a different way to configure vfi membership.... this way works:! interface GigabitEthernet0/3 description Facing CE switchport trunk allowed vlan none switchport mode trunk logging event link-status no cdp enabl...