Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have ASR9K without ISM module with 4.3 IOS-XR. I need to configure the NAT64 on the router. Want to undersatnd whether it is possible without ISM module?
I have nexus 7000 with 6.0(1). It got rebooted while connecting the servers. Reset reason is shown as unkown. How to troubleshoot this from logs? Below are logs from nexus switch once it comes back after reboot : show module intern...
I have the following connectivity :Nexus(7004) - M1 8Port card with x2-10GB-SR <----------------------> 6509 -- 6704 card -- xenpak-10GB-SR The fiber link is not coming up. Please share your inputs or any speific fiber cable is requied. ...
I have a 6500 switch with SUP720. I need to implementthe PBR on the SVI Interface. Whether this will be hardware based PBR or all the packets will routed by software?
CPE --- PE---P---P---PE----CPEAbove is the topology. We need to enable the cRTP between the CPE devices.SP will not configure the cRTP on the PE Devices.How we can achieve with L3 VPNs?
Dear Jon,Thanks for your prompt response. I am using IOS - 12.2(18)SXF16. For Configuration below, packets will hardware based switched or MSFC will be used ?Whether adding a PBR on SVI will add to CPU utilization ?***********************************...
Can you try compacting the Database?Pls refer the following URL for compact:http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs33/user/ae.htm#wp364964Note:For safty sake do a system backup, before doing compacting database.
