I've just connected via pppoe to a fibre 70/40mbs service but only get around 12mbs bandwidth. The FE4 interface reports running at 100mbs Full Duplex so was wondering if the dialer interface has some kind of limit around 12mbs?If the router is limit...
Hi, about to install first UC320w and wanted some sample 800 series router configurations showing required port fowarding, ACL entries and QoS examples.Thanks.
so is that the pppoe dialer interface? the FE4 WAN interface is only showing 30/255 RX load so the download is only consuming 11.76% of available bandwidth which could appear to be correct given the 12mbs max doewnload speed.
thanks - at the suggestion of someone else i turned off IPS on the WAN interface, changed the mss-adjust to 1400 from 1452 and ran another speedtest and carried out a 700mb iso download. FE4 is running at 100mbs Full Duplex.The ISO came down at aroun...
that performance table agrees with the 12.8mbs I got on a speedtest.you certainly need to take a large jump in price bracket to get a cisco router capable of operating at 100mbs!The choices available appear to be891/892 - 50mbsISR 1861 - 74mbsISR G2 ...
